[Guide] Lenovo ThinkPad T440P

[RehabMan]

"You should use an invalid ig-platform-id (0x12345678) if you suspect graphics issues"
=> that I want to ask, I install success with invalid already, How Can I config to get full mem graphic after install ??
after install I got only 7MB graphic

Inject EDID.
Make sure you implement backlight control properly.
You will need to read up on Clover config.plist/Graphics/EDID options.
Hint: To inject Clover detected EDID, set config.plist/Graphics/EDID/Inject=true

 

[lighting2]

Inject EDID.
Make sure you implement backlight control properly.
You will need to read up on Clover config.plist/Graphics/EDID options.
Hint: To inject Clover detected EDID, set config.plist/Graphics/EDID/Inject=true

inject EDID like this, OK?


System restart boot installer after do this

 

[RehabMan]

inject EDID like this, OK?


System restart boot installer after do this

Install using invalid ig-platform-id.
Deal with graphics later.

 

[lighting2]

I will add it later,forgot to attach it.
But you can also use config.plist and add SSDT-T440P.aml into usb efi/clover/patched and run installation all fine.
Just make sure you add into kexts folder:
Usbinjectall.kext for 3.0 port for faster installation.
Also you can add fakepciid +fakepciid_hd_graphics.kext for qe/ci during installation.

Is the path of patch correct?

efi/clover/patched
or
EFI/CLOVER/ACPI/patched

this is basic config for having QE/CI ?
I just want to have QE/CI after install macos success

 

[kingduglu]

I think that you are using the wrong version of IOregistryExplorer therefore the copy of IOreg that you uploaded is corrupted.

Read the guide from "Toleda" on how to make a copy of IOreg:
https://www.tonymacx86.com/threads/guide-how-to-make-a-copy-of-ioreg.58368/

The IOregistryExplorer that you should use is attached on the first post of his guide.

Do the IOreg capture again with this IOregistryExplorer from Toleda guide and upload the copy of ioreg again.

Woods, okay. next try

 

[RehabMan]

Is the path of patch correct?

efi/clover/patched
or
EFI/CLOVER/ACPI/patched

this is basic config for having QE/CI ?
I just want to have QE/CI after install macos success

EFI/Clover/ACPI/patched is where Clover loads ACPI files.

 

[kingduglu]

Is the path of patch correct?

efi/clover/patched
or
EFI/CLOVER/ACPI/patched

this is basic config for having QE/CI ?
I just want to have QE/CI after install macos success

have you got the 3k Model? Try using ig-platform-id 0x0d220003... worked for me on 3k Model

 

[RehabMan]

Woods, okay. next try

To collect a valid accounting of USB ports, you need to use the port limit patch.
Read this guide:
https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/

 

[kingduglu]

To collect a valid accounting of USB ports, you need to use the port limit patch.
Read this guide:
https://www.tonymacx86.com/threads/guide-creating-a-custom-ssdt-for-usbinjectall-kext.211311/

lmao had the 10.12 port limit patch instead of the 10.13 one...

 

[RehabMan]

lmao had the 10.12 port limit patch instead of the 10.13 one...

You will want to document each active SSPx and HSxx port regarding their location and relation.