- Joined
- Jan 19, 2012
- Messages
- 9
- Motherboard
- Macbook Air
- CPU
- i5 2.5GHz
- Graphics
- Integrated Intel 3000
Hey everyone,
Managed to get my GA-Z77X-D3H practically working 100%.
My Specs:
MB: GA-Z77X-D3H Rev 1.0
GFX: GT640
HDD: Samsung 128GB 830 series SSD, 3x 1TB Seagate 7200RPM Barracuda
PSU: Corsair HX650
CPU: Intel Core i5 3750K (running at stock 3.4GHz)
All power functions, and everything working out of the box, even graphics. Only issue for me was audio. bloody VT2021. I'm pretty happy with my overall build, works so nicely.
I lived with using VoodooHDA for a week since I did the build. It wasn't satisfying - my HD audio didn't work, instead I was stuck with stupid 3.5mm jack to my 5.1ch amplifier + kept getting crackly audio every now and then. I have just come from an iMac (horray, i'm back in the OSX86 scene), and Hidef audio is something I love.
Anyways, after a tonne of browsing around, I found a Kext for my MB with a DSDT Patch over at kexts.com.
Here's the kext and some details: http://www.osx86.net/downloads.php?d...id=3041&page=4
The DSDT patching for this Mobo in particular is a bitch, if you take a look in the comments section down the bottom, i've written vague instructions, however if it gets enough interest, i'll do a full patching guide with screenshots, etc.
Basically, at this point in time, i've managed to get the HD audio output and green output jack working. I'm yet to test the microphone input. I'm really keen on making the front ports all work for me, however it'll probably be a tonne more patching, and I quite frankly don't have the time at this point in time.
Managed to get my GA-Z77X-D3H practically working 100%.
My Specs:
MB: GA-Z77X-D3H Rev 1.0
GFX: GT640
HDD: Samsung 128GB 830 series SSD, 3x 1TB Seagate 7200RPM Barracuda
PSU: Corsair HX650
CPU: Intel Core i5 3750K (running at stock 3.4GHz)
All power functions, and everything working out of the box, even graphics. Only issue for me was audio. bloody VT2021. I'm pretty happy with my overall build, works so nicely.
I lived with using VoodooHDA for a week since I did the build. It wasn't satisfying - my HD audio didn't work, instead I was stuck with stupid 3.5mm jack to my 5.1ch amplifier + kept getting crackly audio every now and then. I have just come from an iMac (horray, i'm back in the OSX86 scene), and Hidef audio is something I love.
Anyways, after a tonne of browsing around, I found a Kext for my MB with a DSDT Patch over at kexts.com.
Here's the kext and some details: http://www.osx86.net/downloads.php?d...id=3041&page=4
The DSDT patching for this Mobo in particular is a bitch, if you take a look in the comments section down the bottom, i've written vague instructions, however if it gets enough interest, i'll do a full patching guide with screenshots, etc.
Basically, at this point in time, i've managed to get the HD audio output and green output jack working. I'm yet to test the microphone input. I'm really keen on making the front ports all work for me, however it'll probably be a tonne more patching, and I quite frankly don't have the time at this point in time.