- Joined
- Mar 15, 2014
- Messages
- 23
- Motherboard
- Asus
- CPU
- INTEL Core i5 4200U
- Graphics
- Intel HD4400
- Mac
- Classic Mac
- Mobile Phone
I'm afraid I didn't
View attachment 172283
sys info: Intel HD Graphics 4400 1536 MB
EDIT: Also when I want to install chrome extension, like Adblock it logs me off - if that helps somehow
Kexts in EFI/Clover/kexts are not injected when FakeSMC.kext is installed to the system volume and config.plist/SystemParameters/InjectKexts=Detect.
Since your system boots and your image does not show FakeSMC.kext, I can only assume that FakeSMC.kext is installed to /S/L/E or /L/E, in which case I would not expect kexts in Clover/kexts to be loaded.
All kexts should be installed to /S/L/E (or /L/E on 10.11). Clover/kexts is only for essential kexts needed to boot the installer and recovery partition.
You can read about it in the guide: http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html
Ooh, so that was the deal! From my understanding, storing kexts in Clover was preferred over S/L/E, because you can perform OS updates etc. without issues... so much for my english...
Thank you so much for this thread using this settings and faking my cpu in clover i was able to install EC on the g3258 with native graphics however i am having a lot of flickering on the screen and only showing 7MB of graphics in system profile ... I know this is a laptop support thread but this method worked for me on the G3258 .... Maybe i can try with different buffer edits on clover ??? what can you recommend me to do ???? I know this might be a longshot since the G3258 isnt quite the full HD4600 and if i could i would just buy a dedicated GPU but this build is using an antek ISK 110 so no room for nothing else ... But maybe we could find a solution and add a really budget CPU to the list of compatible CPUs
Thanks
Shremi
Hello foks!
Just adquired a new laptop, Toshiba S50-B-11T and wanted to install a MacOS partition to allow me test my programs there (I'm mainly a Linux/Windows developer and want also my apps to work on MacOSX).
The think is that I just Clover to configure it, but somehow the Graphic Card part is doing derp stuff.
I mean, this laptop gots an Intel HD 4400 / Radeon R7 M260, 6GB of DDR3L which 2 of them are dedicated to graphic card.
Ok, try searching if I can enable the R7 over the forum and also Google and have no luck at all, so decided to go for the Intel which is enough for having a nice use experience I thought. But somehow it only detects me 4MB of RAM instead of 1024 or 2048 or something
Tried which your kexts installing them at S/L/E and later at E/E/C/k but somehow it's not detecting the correct amount... Is there something I'm missing? Thanks.
PS: RehabMan your work on github it's amazing.
I already read before my first post, and reading it again just in case I miss something.
Of course I know Radeon it's imposible, that's why I want the Intel working.
It still shows me: Intel HD Graphics 4400 (which is OK). VRAM: 4MB (Wrong) after reading the fAQ and this post.
I already put the FakePCIID and FakePCIID_Intel_HD_Graphics kexts, and the ig-platform-id and nothing, also tried with FakePCIID and a FakePCIID_HD4600_HD4400 instead, but still no luck at all.
Edit: Doing a clean reinstallation due I broke something testing