- Joined
- Dec 12, 2012
- Messages
- 44
- Motherboard
- ASRock H170M-ITX/DL
- CPU
- i3-6100
- Graphics
- GTX 1050 Ti
- Mac
- Mobile Phone
To do this you need the following:
Guide:
This Web Driver (It is a specific version) -- Download Here
SMBIOS for iMac13,1 in clover
SMBIOS for iMac13,1 in clover
Guide:
First Download the WebDriver from this Guide.
Then Unzip and install it to your Hackintosh. DO NOT REBOOT!!!!!
Next thing is to open Terminal and type the following commands:
Then open Clover Configurator.app you can download it Here -- Download Clover Configurator
Then Reboot the Hackintosh
NEXT ENJOY YOUR EVGA 1050ti
It is possible this fix may work with other pascal cards but I have only tested on the EVGA GeForce GTX 1050Ti 4GB SSC and also I Have only tested on 10.12.5 but im sure it will work for 10.12.4 and lower as well Then Unzip and install it to your Hackintosh. DO NOT REBOOT!!!!!
Next thing is to open Terminal and type the following commands:
cd /System/Library/Extensions/NVDAStartupWeb.kext/Contents
sudo vi Info.plist
(then edit the build number to the build number you are running)
(to find this build number go to the Apple Logo Button top left)
(then click on About This Mac and then click on the version)
(number)
(The Numbers and Letters are the build number you want)
(enter that in place of the current build number you have in the)(file opened in terminal)
sudo vi Info.plist
(then edit the build number to the build number you are running)
(to find this build number go to the Apple Logo Button top left)
(then click on About This Mac and then click on the version)
(number)
(The Numbers and Letters are the build number you want)
(enter that in place of the current build number you have in the)(file opened in terminal)
Then go to the tab that says Mount EFI and mount your EFI Partition
Next open the EFI partition and open EFI/CLOVER/
Then double click on the config.plist
Next open the tab that says Boot and make sure the option that says nvda_drv=1 is ticked
Then open the tab that says SMBIOS
Next click on the little magic wand
Then select the imac picture
Next go to the drop down box and select "iMac (13,1) - LGA1155"
then click the shake button by "Week of Manufacturer" 10x or so
and then click the shake button by "Unit Number" 10x or so
Then press Command + S to save or go tot the File tab and save the configuration
Next open the EFI partition and open EFI/CLOVER/
Then double click on the config.plist
Next open the tab that says Boot and make sure the option that says nvda_drv=1 is ticked
Then open the tab that says SMBIOS
Next click on the little magic wand
Then select the imac picture
Next go to the drop down box and select "iMac (13,1) - LGA1155"
then click the shake button by "Week of Manufacturer" 10x or so
and then click the shake button by "Unit Number" 10x or so
Then press Command + S to save or go tot the File tab and save the configuration
NEXT ENJOY YOUR EVGA 1050ti
Attachments
Last edited: