- Joined
- Jun 10, 2010
- Messages
- 227
- Motherboard
- ASRock Z490M-ITX/ac
- CPU
- i7-10700
- Graphics
- RX 580
- Mac
- Mobile Phone
Hi,
Motherboard: Gigabyte GA-Z87X-SLI (http://www.gigabyte.com.au/products/product-page.aspx?pid=4778#ov ) which I'm reliably informed is the same spec as the http://www.gigabyte.com.au/products/product-page.aspx?pid=4764#ov
Graphics: Nvidia / GeForce 9600GT & Intel built-in GPU (System Profiler shows: ox8086)
Bootloader: Clover from Unibeast / Multibeast
Over the weekend I upgraded my existing Yosemite system to El Capitain - all good except for I can't figure out how to have the motherboard's internal Intel HD GPU running at the same time as the PCIe GeForce 9600 GPU.
On Yosemite the internal GPU 'just worked' and it was harder to get the 9600 up & running. This time around the dual-head 9600 is driving two monitors perfectly with Nvidia injected by Clover during boot. My problem is firing up the motherboard's DVI (Intel GPU) as well, which was fine under Yosemite.
Can anyone suggest something to try please? I've confirmed that 'integrated graphics' is enabled in the BIOS and read through the 'Read Me First' post (http://www.tonymacx86.com/threads/read-me-first-graphics-setup-troubleshooting.183617/) in this section of the forums.
Sadly 'GraphicsEnabler=No' didn't help and neither did 'InjectIntel=True' as Clover boot args. El Capitain's System Report lists the Intel GPU but states 'No Kext Loaded'. Which gives me a hint at the problem....but not a solution.
Cheers,
Steve
Motherboard: Gigabyte GA-Z87X-SLI (http://www.gigabyte.com.au/products/product-page.aspx?pid=4778#ov ) which I'm reliably informed is the same spec as the http://www.gigabyte.com.au/products/product-page.aspx?pid=4764#ov
Graphics: Nvidia / GeForce 9600GT & Intel built-in GPU (System Profiler shows: ox8086)
Bootloader: Clover from Unibeast / Multibeast
Over the weekend I upgraded my existing Yosemite system to El Capitain - all good except for I can't figure out how to have the motherboard's internal Intel HD GPU running at the same time as the PCIe GeForce 9600 GPU.
On Yosemite the internal GPU 'just worked' and it was harder to get the 9600 up & running. This time around the dual-head 9600 is driving two monitors perfectly with Nvidia injected by Clover during boot. My problem is firing up the motherboard's DVI (Intel GPU) as well, which was fine under Yosemite.
Can anyone suggest something to try please? I've confirmed that 'integrated graphics' is enabled in the BIOS and read through the 'Read Me First' post (http://www.tonymacx86.com/threads/read-me-first-graphics-setup-troubleshooting.183617/) in this section of the forums.
Sadly 'GraphicsEnabler=No' didn't help and neither did 'InjectIntel=True' as Clover boot args. El Capitain's System Report lists the Intel GPU but states 'No Kext Loaded'. Which gives me a hint at the problem....but not a solution.
Cheers,
Steve
Last edited: