Creative CA0132 codec discussion (Sound Core3D)

[Dajokeisonu]

When I get off of work I will try this out currently

In sound there is just Internal Speakers and Digital out. Digital out does not work. Internal speakers the vol bar alowes me to control it half way then it mutes. The internal mic has no controls for vol they are greyed out in the midi settings.

So I tried it and it shows in sound options as an external mic it does not work it gives me access to change vol but the mic does not work it just creates a buzz if I try to do a sound record. vol still mutes at half on the slider for sound it shows on the drop menu as internal speaker

 

[wern]

So I tried it and it shows in sound options as an external mic it does not work it gives me access to change vol but the mic does not work it just creates a buzz if I try to do a sound record. vol still mutes at half on the slider for sound it shows on the drop menu as internal speaker

Do you see two input devices, an internal and an external microphone? The internal microphone is probably digital and needs different settings.

@TravelerTechie and other ZxRi users, please try this SSDT with layout-id 1.

 

[tecnicasopr]

Do you see two input devices, an internal and an external microphone? The internal microphone is probably digital and needs different settings.

@TravelerTechie and other ZxRi users, please try this SSDT with layout-id 1.

I tried it. Rear and front mics are working. Also front HP is working but not the rear one. Digital Out works but not analog outputs...

 

[wern]

I tried it. Rear and front mics are working. Also front HP is working but not the rear one. Digital Out works but not analog outputs...

What is your system-id?
Have you installed the CodecCommander to /L/E?
According to gigabyte pictures the Core3D codec is installed. If it's the ZxRi, try this AppleALC with the new SSDT

 

[tecnicasopr]

What is your system-id?
Have you installed the CodecCommander to /L/E?
According to gigabyte pictures the Core3D codec is installed. If it's the ZxRi, try this AppleALC with the new SSDT
View attachment 433659

The system-id is the same as your picture. This is a screenshot of mine:

CodecCommander is not install to /L/E. It is install in EFI/CLOVER/kexts/Other
My motherboard is a Gigabyte GA-Z170X-Gaming G1. Back then was Gigabyte's flagship.

I'll try your AppleALC and SSDT
Thanks in advance. You are one of the best helping people around in this forum. Usually I don't like to ask for help but this motherboard audio is complicated. With Mojave I had everything working including sleep but then sleep stop working after updating clover and kexts. Because I did that all at the same time now I dont know what cause the problem... With AppleALC alone and without CodecCommander I have audio through S/PDIF out only and HDMI audio....

I'll report back after trying your files. Thanks again.
Forgot to mention in using CodecCommander version 2.7.1 downloaded from Rehabman's fork of TimeWalker's

 

[wern]

CodecCommander is not install to /L/E. It is install in EFI/CLOVER/kexts/Other

CodecCommander must be in /L/E, otherwise the commands will be executed too early and have no influence.
With this AppleALC you have to use layout-id 4, but on the screenshot I can see that you already using it.

 

[tecnicasopr]

CodecCommander must be in /L/E, otherwise the commands will be executed too early and have no influence.
With this AppleALC you have to use layout-id 4, but on the screenshot I can see that you already using it.

I already installed CodecCommander to /L/E using layout-id 4 but no audio output yet. Only audio output through S/PDIF and HDMI. None of HP outputs and mic inputs are working...
I forgot to disable SIP. After disabling SIP and rebooting I still don't have analog audio output, only S/PDIF and HDMI audio. Both internal mics are working now but none of HP are...
Just in case I have latest macOS Catalina 10.15.1 (19B88).

 

[wern]

If you have already fixed the permissions and rebuilt the cache and CodecCommander is loaded, try to clear the DSP. In addition, core audio is reloaded.
If it still does not work, copy the CodecCommander client hda-verb to /usr/local/bin and show me the output of the script

 

[tecnicasopr]

If you have already fixed the permissions and rebuilt the cache and CodecCommander is loaded, try to clear the DSP. In addition, core audio is reloaded.
If it still does not work, copy the CodecCommander client hda-verb to /usr/local/bin and show me the output of the script

Yes, I did already fixed permissions and rebuilt the cache. I also made sure CodecCommander is loaded with following terminal command: kextstat | grep -v com.apple


I'll try to clear the DSP and report back soon...

I know this is not the AppleALC you uploaded, but I did use it, and after bad results I then tried again with this one. Don't worry I'll put back again the other one before testing again..

 

[tecnicasopr]

Here's the output of the script: