Creative CA0132 codec discussion (Sound Core3D)

[dabetts]

OK...Frustrating. CodecCommander.kext was in the /Library/Extensions folder already. I replaced it with the one that you provided. I repaired the permission and rebuilt the cache. I also changed the layout_id to 4. Still no sound. Attached is an updated ioreg file.

Sorry. I am sure this is as frustrating for you as it is for me.

 

[wern]

The ioregistryexplorer dump shows me that everything is alright. If you use the correct jack and it still does not work after sleep, we need to change the streams.

 

[dabetts]

So, I still have nothing, sadly. I've tried the Line Out output from the Motherboard to the Line In input on the Monitor. I've tried the Displayport output to the monitor, and I've even tried both of the headphone jacks (on the front of the case and direct from the Motherboard).

 

[wern]

Copy "hda-verb" to /usr/local/bin, drag the script to the terminal window and show me the output.

 

[dabetts]

Copy "hda-verb" to /usr/local/bin, drag the script to the terminal window and show me the output.

With which options should I run hda-verb?

I get the following:

hda-verb for CodecCommander (based on alsa-tools hda-verb)

usage: hda-verb [option] nid verb param

-l List known verbs and parameters

-L List known verbs and parameters (one per line)

 

[wern]

No options, the script calls hda-verb. Drag the script to the terminal window and hit enter.

 

[dabetts]

No options, the script calls hda-verb. Drag the script to the terminal window and hit enter.

So, I may be missing it, but I am not seeing a script to drag to the terminal window. I hope that am not being thick here, but I see hda-Verb in the directory, but I am unclear which script to which you are referring.

 

[wern]

I'm sorry, I forgot to attach it. Here it is

 

[dabetts]

I'm sorry, I forgot to attach it. Here it is

Ahhh...

Got it. Below is the output.

Select stream 5

Selected stream

parameter ID: 0x18, parameter value = 05

Source connection point

parameter ID: 0x19, parameter value = 43

Destination connection point

parameter ID: 0x1a, parameter value = 00

Number of audio channels

parameter ID: 0x1b, parameter value = 02

Enable control

parameter ID: 0x1c, parameter value = 00

Select stream C

Selected stream

parameter ID: 0x18, parameter value = 0c

Source connection point

parameter ID: 0x19, parameter value = 09

Destination connection point

parameter ID: 0x1a, parameter value = 70

Number of audio channels

parameter ID: 0x1b, parameter value = 02

Enable control

parameter ID: 0x1c, parameter value = 00

Select stream 14

Selected stream

parameter ID: 0x18, parameter value = 14

Source connection point

parameter ID: 0x19, parameter value = 48

Destination connection point

parameter ID: 0x1a, parameter value = 70

Number of audio channels

parameter ID: 0x1b, parameter value = 02

Enable control

parameter ID: 0x1c, parameter value = 01

Select stream 15

Selected stream

parameter ID: 0x18, parameter value = 15

Source connection point

parameter ID: 0x19, parameter value = 49

Destination connection point

parameter ID: 0x1a, parameter value = 71

Number of audio channels

parameter ID: 0x1b, parameter value = 02

Enable control

parameter ID: 0x1c, parameter value = 01

Select stream 16

Selected stream

parameter ID: 0x18, parameter value = 16

Source connection point

parameter ID: 0x19, parameter value = 4a

Destination connection point

parameter ID: 0x1a, parameter value = 72

Number of audio channels

parameter ID: 0x1b, parameter value = 02

Enable control

parameter ID: 0x1c, parameter value = 01

 

[manpower]

Hi folks, I urgently need help coz Last night everything still alright but the next day all of sudden my system no sound at all!
My board is Gaming 7 with H.Sierra 10.13.6, I follow this thread post#1 : AppleALC + Lilu in Cover kext / Others, CodecCommander.kext in /L/E. Untouched AppleHDA in S/L/E, layout-ID set to 4. My system audio output can see all the devices, even Bluetooth but just no sound come out! I wondering it is hardware problem?

one thing is weird in my ioreg showing the HDEF layout ID : 7, if I set to 7 there is no devices at all!

Here I attached ioreg and 2 snaps hope you guys can help me out please ! ! !