ASUS X299 Monterey/Ventura Support

[liangli]

Hello, could the following drivers be used to ASUS R6EE? thanks

 

[Loloflatsix]

Hello, could the following drivers be used to ASUS R6EE? thanks
View attachment 532708

I use IntelMausi.kext

 

[LateBloomer]

I use IntelMausi.kext

View attachment 532775

Hi, there!

I've been looking over the opencore guide to make sure I didn't miss anything and also searched the forum, but can't seem to find anything on potential issues with intelimausi.kext and/or SmallTreeIntel82576.kext not working with Monterey.

The internet was working fine on Catalina and on Big Sur. However, after I updated to Monterey, I no longer have internet. Both ports show inactive. But everything else is working fine as far as I can tell. There were no issues or errors encountered during the installation. I tried 0.7.4 & 0.7.5, but the result is the same. Any ideas on what it could be?

 

[Loloflatsix]

My experience on Monterey :
Asus Prime deluxe,
- Intel I219v2 device iD 808615b8 Ok kext loaded connected En0 ( intelimausi.kext)
- Intel I211 device ID 80861539 NOT OK kext loaded but not connected En1 (SmallTreeIntel82576.kext or older kext)
Gigabyte X299 WU8
- Intel I219v2 device iD 808615b8 Ok kext loaded connected En0 ( intelimausi.kext)
- Intel I210 device ID 80861533 NOT OK kext loaded but not connected En1 (SmallTreeIntel82576.kext or older kext)
Asus Prime A II
- Intel I219v2 device iD 808615b8 Ok kext loaded connected En0 ( intelimausi.kext)

[Solved on Asus Prime Deluxe]

I found the solution here : #33,994

Asus Prime deluxe,
- Intel I219v2 device iD 808615b8 Ok kext loaded connected En0 ( intelimausi.kext)
- Intel I211 device ID 80861539 OK kext loaded connected En1 (Apple2xx.kext )

 

[sensite]

i'm stuck with this crash after upgrading from sur to monterey. Would anyone have any idea on what is crashing?


*edit..figured it out. had a mismatch between SMBIOS and serials, but it still won't finish the upgrade. spends like 2 mins with the logo and loading bar then it says shutdown bye launchd quiesce complete. if i reboot it just repeats this again and again

 

[Loloflatsix]

i'm stuck with this crash after upgrading from sur to monterey. Would anyone have any idea on what is crashing?


*edit..figured it out. had a mismatch between SMBIOS and serials, but it still won't finish the upgrade. spends like 2 mins with the logo and loading bar then it says shutdown bye launchd quiesce complete. if i reboot it just repeats this again and again

Yes, updating to Monterey is not easy: can you share a screenshot from your boot screen before selecting your startup disk.

 

[sensite]

Yes, updating to Monterey is not easy: can you share a screenshot from your boot screen before selecting your startup disk.

I gave up trying to fix the upgrade from sur. Did a clean install and everything was good. I guess it didn’t like the upgrade for whatever reason

 

[ac9001]

Just installed Monterey on my machine and all is good except for my usbs. I dont know why but my usbs are all jacked up and usbinjectall is not working at all and hackintool isnt showing much. Im using macpro 7,1. Specs here as my sig will not update for some reason..
Asus x299 prime deluxe (1) rx6900xt, i9 7980
opencore .7.4

 

[Junologue]

** Experiencing Slow Boot Times in Monterey? **​

Tried a new install on my

Intel SSD 665p Series 1.0TB M.2​

result:

2021-11-06 21:29:48.475498+0100 0x542 Default 0x0 0 0 kernel: (apfs) spaceman_scan_free_blocks:3153: disk6 scan took 15.460786 s, trims took 15.278694 s


2021-11-06 21:30:59.989070+0100 0xd09 Default 0x0 0 0 kernel: (apfs) spaceman_scan_free_blocks:3153: disk7 scan took 66.843391 s, trims took 66.581917 s

 

[salvatore.polito]

Using the 0.7.4 Base-EFI I get this error sometimes. I had to reset and usually the next boot will succeed.

What does it means?