- Joined
- Sep 13, 2015
- Messages
- 65
- Motherboard
- ASUS VivoBook S15 S530Fn
- CPU
- i7-8565U
- Graphics
- UHD 620 + GTX MX150, 1920x1080
- Mac
- Mobile Phone
Hello everyone.
I recently bought an Asus VivoBook S15 S530Fn and I want to install 10.14.4 in it.
Setup:
- Intel Core i7-8565u
- Graphics: Intel UHD 620 + NVIDIA GeForce MX150
- 8GB DDR4 2400MHz RAM
- Samsung 860 EVO 500GB SSD
- Wi-Fi & BT Combo Card: Intel 8265NGV [will switch with a BCM4352 from my first hackintosh that uses Ethernet]
- BIOS Version 300
I created an Mojave USB installer using UniBeast and followed two guides on GitHub: Guide #1 [nguyentrucxinh] + Guide #2 [tctien342].
The Guide #1 helped me getting into the Mojave Installer (took around 5 min only to boot up ) but the installer keeps freezing when hitting "2 minutes remaining" and it gets stuck in this step:
Can't move mouse and I don't actually know if the whole system is still installing or not. When I boot Clover it detects a new APFS Drive installed on the SSD. Can't boot it as well (I assume the installation failed).
The Guide #2 didn't work at all. Can't boot installer and partition created using the Guide #1.
Both of them are optimised for disabling a NVIDIA GTX940M and not a MX150 (probably one of the issues).
Also, can I install and boot 10.14 using a NVMe Drive? I ordered a Samsung 970 Evo 250GB NVMe Drive so I can test this out.
Please tell me what can I do next because I'm out of ideas here.
Any kind of help is appreciated
I recently bought an Asus VivoBook S15 S530Fn and I want to install 10.14.4 in it.
Setup:
- Intel Core i7-8565u
- Graphics: Intel UHD 620 + NVIDIA GeForce MX150
- 8GB DDR4 2400MHz RAM
- Samsung 860 EVO 500GB SSD
- Wi-Fi & BT Combo Card: Intel 8265NGV [will switch with a BCM4352 from my first hackintosh that uses Ethernet]
- BIOS Version 300
I created an Mojave USB installer using UniBeast and followed two guides on GitHub: Guide #1 [nguyentrucxinh] + Guide #2 [tctien342].
The Guide #1 helped me getting into the Mojave Installer (took around 5 min only to boot up ) but the installer keeps freezing when hitting "2 minutes remaining" and it gets stuck in this step:
Can't move mouse and I don't actually know if the whole system is still installing or not. When I boot Clover it detects a new APFS Drive installed on the SSD. Can't boot it as well (I assume the installation failed).
The Guide #2 didn't work at all. Can't boot installer and partition created using the Guide #1.
Both of them are optimised for disabling a NVIDIA GTX940M and not a MX150 (probably one of the issues).
Also, can I install and boot 10.14 using a NVMe Drive? I ordered a Samsung 970 Evo 250GB NVMe Drive so I can test this out.
Please tell me what can I do next because I'm out of ideas here.
Any kind of help is appreciated