Perhaps all or most of kext might work in the future update of MacOS Sierra once it is released or the current betas.
Still do not know if I'll make a guide to Sierra since it takes me some time and I'm a little busy right now, but in the future will try to do so.
Xavi16, I have tried with no kext and indeed some of my USB ports do not work.Only use your DSDT and will not need more, you can download mine and look into the make-your patches, I assure you that you will not need the USBInject.kext or anything else, the DSDT will do all the work.
When you extract the DSDT and you put it inside EFI partition , your DSDT will tell El Capitan the port mapping and more hardware. But then because it is important to have carried out mapping usb ports? simple, because if you need to remove specific ports, you'll know that you remove from your DSDT or cancel by some other means, as also explained in the guide.
If you already have your DSDT working, try to eliminate the XHCI-x99-injector.kext, and see if your DSDT is doing its job.
remember that before you should have the patch removal limit ports on your config.plist
Hey Coclondis, have you got the correct processor ID in Clover. I am also using an Asus X99a (but a USB3.1 version) and a 5820k. Go to Clover/Kexts and Patches/FakeCPUID and enter 0x0306E0. My GeekBench 3 score is about 21480. I need a very stable system so I do not overclock. My maximum processor speed is 3.4GHz, I think.
Really????? On the right, third window from the top. I can see that it is empty. OS X has no idea what your porcessor is as Haswell-E is not recognised. You have to 'fake' it. Hence, FakeCPUID.@Number6 Hey thank for your answer!!
I go to this panel ''kernel and kext patches'' and i don't see ''FakeCPUID'', i open config.plist for see if was this kext.
View attachment 208541
Hello Friendjajaja sorry i am blind, very very blind.
EDIT: My CPU now in geekbench 18700 stable.
I am following your guide, but i maked my usb with unibest (because the usb dont boot), your folder ''USB EFI Install'' and Efi clover from your guide.
I used X99PlatformPlugin.kext indicated in your guide
I dont generated my SSDT with my CPU, i dont know make this...
I am making a usb with your method usb boot again.