- Joined
- Nov 11, 2016
- Messages
- 20
- Motherboard
- Asrock Z390M PRO 4
- CPU
- I9-9900K
- Graphics
- GTX 1050 Ti
Hey guys, this is my first customac build. i spend a lot of time here on the forum to be "prepared" for the first install, but no success. so i decided to post this topic.
this is my hw setup:
Corsair 88r carbide series Case
Toughpower 750w gold
Asrock Z390M Pro 4 Mainboard
Intel I9-9900K
Thermaltake 3.0 extreme S Set
Samsung 970 Evo 500GB
Ballistix x16GB ddr4-2666
Pioneer BD-RW
first, i have updated the BIOS version to 1.50 to be sure that the MB recognizes the 9. gen CPU.
then i made the settings in bios for mojave installation,
but the asrock bios hasn't the "load opt. Settings feature", no "OS type: other OS" found in the setting.
Chipset → IOAPIC 24-119 Entries : Enabled (also missing).
next i created the mojave installer for UEFI with unibeast 9 on a macbook air successful and followed the install guide here:
https://www.tonymacx86.com/threads/...ojave-on-any-supported-intel-based-pc.259381/
it seems to work, but it freeze at the end of the process, the status bar is at 100%. tried it 2 times, but still same result.
then i found this topic here:
https://www.tonymacx86.com/threads/...i9-9900k-z390-aorus-pro-dual-vega-64s.264948/
i made almost the same modifications like blouse in his build, except the graphic settings because no AMD, and no USB settings because there are only the i/o from case itself.
choosing the "boot mac os installer" at the clover menu, this time echo is off (if echo is the same name for the function like in windows) and it shows a lot of informations, one of these info is that something failed with NVRAM. but the process ends after 2 minutes.
i'm going to make a picture of it in a few minutes
can somebody help? i'm a windows user for many many years, no experience with OSX (only ios^^).
the final idea is to have OSX on the SSD, AND win10 on a HDD (for specific AUDIO software i'm using, maybe on a second SSD next moth). with the option to choose every time i start the pc.
..sorry for my grammar, i hope you can read this post
Thanks
this is my hw setup:
Corsair 88r carbide series Case
Toughpower 750w gold
Asrock Z390M Pro 4 Mainboard
Intel I9-9900K
Thermaltake 3.0 extreme S Set
Samsung 970 Evo 500GB
Ballistix x16GB ddr4-2666
Pioneer BD-RW
first, i have updated the BIOS version to 1.50 to be sure that the MB recognizes the 9. gen CPU.
then i made the settings in bios for mojave installation,
but the asrock bios hasn't the "load opt. Settings feature", no "OS type: other OS" found in the setting.
Chipset → IOAPIC 24-119 Entries : Enabled (also missing).
next i created the mojave installer for UEFI with unibeast 9 on a macbook air successful and followed the install guide here:
https://www.tonymacx86.com/threads/...ojave-on-any-supported-intel-based-pc.259381/
it seems to work, but it freeze at the end of the process, the status bar is at 100%. tried it 2 times, but still same result.
then i found this topic here:
https://www.tonymacx86.com/threads/...i9-9900k-z390-aorus-pro-dual-vega-64s.264948/
i made almost the same modifications like blouse in his build, except the graphic settings because no AMD, and no USB settings because there are only the i/o from case itself.
choosing the "boot mac os installer" at the clover menu, this time echo is off (if echo is the same name for the function like in windows) and it shows a lot of informations, one of these info is that something failed with NVRAM. but the process ends after 2 minutes.
i'm going to make a picture of it in a few minutes
can somebody help? i'm a windows user for many many years, no experience with OSX (only ios^^).
the final idea is to have OSX on the SSD, AND win10 on a HDD (for specific AUDIO software i'm using, maybe on a second SSD next moth). with the option to choose every time i start the pc.
..sorry for my grammar, i hope you can read this post
Thanks