install freeze

When the installation starts, it hangs on the apple logo. I tried to boot in safe mode - it also hangs. I waited for a very long time, the process did not move further. PC: Lenovo ideapad 520-15IKB CPU: Intel® Core™ i3-7100U BIOS settings: I tried to write to a USB flash drive both in EFI...

Have created the USB but inflation gets stuck at End Random Screen. Have tried AptioMemoryFix.efi, OsxAptioFix3Drv.efi, & OsxAptioFix2Drv.efi

Hi Folks, I've been busy trying to install OS X on my new build pretty much the whole of today: Intel Core i5-9600K ASUS Z370-P II 2x SAMSUNG EVO PLUS NVMe drives (was intended for a Windows+OS X dual boot config). ASUS RADEON RX580 8GB OC a Broadcom DW1820A in a PCI-E adapter The very last...

Hi, I'm new on hackitosh installation. I followed the guide for High Sierra using UniBeast and Clover. Once I boot my system with the USB on a 2.0 port it starts the installation (Apple logo) and after 15/20 minutes it arrives almost at the end of the bar and it stops...I left it running for an...

Hey guys, this is my first customac build. i spend a lot of time here on the forum to be "prepared" for the first install, but no success. so i decided to post this topic. this is my hw setup: Corsair 88r carbide series Case Toughpower 750w gold Asrock Z390M Pro 4 Mainboard Intel I9-9900K...

Hi guys, Hardware: Motherboard: ASUS Maximus Hero XI Z390 Ram: Corsair RGB Pro Vengeance x2 8GB 3000 DDR4 CPU: Intel Core i7-9700k Hard Drive: Samsung 860 PRO 500GB Problem - 2 minute left freeze on initial installation (See attached log file). "disk24s1 is not convertible to APFS" I have...

Good Day Everyone. I told my wife that I could build a better Hackintosh for a little more money than the new IMac we were looking at to replace our 2012 model. I actually spent a good bit more (adding a Drobo to the list and other nice things). However, for over a week now this build has been...

Hi I have been working through my build for weeks now, first i was unable to even get to the GUI installer part.. but after carefully rebuilding a vanilla install and clover, following another users install guide for my same motherboard chipset and cpu.. I got the GUI, I formatted/erased my...

Hi there, after about six years with my old Hackintosh it was time to move on. So I decided on the newest hardware and assembled it quite easily. I followed all the rules of the latest installation guide here, but the installation keeps getting stuck. Just after clover (before the MacOS...

Hi guys, This is my first try in installing a Mac! I’m trying to install highsierra from USB with unibeast8.0 update ( created yesterday) I get stuck after: mbinit: done [128 MB total pool size, (85/42) split] All components are totally new! HD1 Samsung evo 500 gB HD2 Seagate 1...

Hi I tried to install many time MacOs Sierra but it stuck in Logo or System uptime in nanoseconds. My laptop is a HP Pavillion Specs: Core i7 8gb RAM ATI Redeon graphics I think i made all the steps correct I need your support please.

First of all Hello. I have and old computer that I wish to use for testing the apple software. I use linux in my everyday and windows sometimes. I don't want to waste a lot of money in buying a apple pc, and them install linux on it because I dislike the apple software. I very good friend of...

Hey guys...I really need some help over here. When I want to install Sierra on my laptop,I get some trouble of it. It suck me for a couple of weeks.. I've read all the guide,both laptop and desktop. And also I had Google for it,but cannot find anything for help. Some guys told me to EC(Embedded...

Hi, this is my first foray into creating a hackintosh. I already have Win 10 installed on my Toshiba Satellite L50-A-19N. I have created a usb via UniBeast off a Mac, using the UEFI Boot option (tried legacy boot but PC did not recognise USB). Aftr selecting 'Boot OSX' in Clover, I get the...

I really need help i keep getting a bluetooth controller missing thing whener i try to boot up el capitan installer. The bluetooth line will come up then the screen goes black. Is it a graphic problem???????? i used slo mo camera to get the last line on camera.

So this is my first time doing anything like this (basically, I have no clue what I'm doing), so really any help or input would be appreciated. Thank you in advance. I've checked the "Big List of Solutions for El Capitan Install Problems" post and I can't seem to find what I need, so as the...

This is my first hackintosh so please excuse my lack of knowledge! lol System Specs Motherboard - Gigabyte GA-H81M CPU - Intel Celeron G1840 Haswell RAM - 8GB DDR3 G.Skill Ripjaws HDD - WD 1TB 7200 RPM PSU - Thermaltake TR2 I'm using Unibeast 6.1 with Clover. I can begin to boot from...

Hey all, I'm trying to install Mountain Lion on my Asus Zenbook UX32a-DB51 and I ran into a problem. I created my bootable USB stick using Unibeast, checking laptop support but not legacy usb. I've got my SATA configuration set to AHCI. When I run USB installer using -v, it hangs at [PCI...