Contribute
Register

Solved > AMD Radeon RX5700 or 5700XT

Joined
Feb 9, 2017
Messages
79
Motherboard
Gigabyte GA-Z390M Gaming x
CPU
i7-8700
Graphics
Asus rog strix Rx 5700 xt
Mac
  1. iMac
Mobile Phone
  1. iOS
Hi everyone. I bought Rx 5700 xt from Asus rog strix. On Catalina is working out of the box. But on high sierra just says display 7mb. Tried couple of thing but it seems not to be working. Should it work on hs? Thanks in advanced.
 
Joined
Feb 9, 2017
Messages
79
Motherboard
Gigabyte GA-Z390M Gaming x
CPU
i7-8700
Graphics
Asus rog strix Rx 5700 xt
Mac
  1. iMac
Mobile Phone
  1. iOS
Now things are getting a little bit messy. My installation was made with a gt 710. Doing some kext updates with hackintool, Catalina won't boot again. Doing some searches I started with a fresh installation.
And I cannot boot to the installer. I managed to update lilu and weg on the usb installer and using agdpmod=pikera I can get to the installer. Erase the drive as afps and the sistema starts installing and then reboots.
And here's where I enter into a loop. Every time I select install from Catalina it keeps installing the restarting and back to the same place.
Any ideas ?
 
Joined
Oct 26, 2013
Messages
122
Motherboard
ASUS Z390-I
CPU
i7-8700K
Graphics
5700xt nitro+
hi everyone, i comes from this thread
and my hack also follow that guide:

my Z390i build with radeon VII and all of its issue coreaudio problems, WEG, SMBIOS and all of that jazz

luckly, right now i already sold my radeon VII. and replace it with sapphire RX 5700xtt nitro+ in hand.
and 6 hours ish to spare today.

so my condition is :

1.my ssd still on catalina cloverEFI
2. imacpro smbios
3. didnt have WEG and LILU ( i remove that for radeon VII based on reseaching this forum.
3b. i added back WEG and LILU withinmy windows partition.
4. igpu enable, with PEG.

and i tried install rx 5700xt, with agdpmod=pikera -v
and got nothing , my hack just restarted right to bios/boot screen

with -v, this the last line before it restart itself :
IMG_2711.JPG


my goal is :

5. i didnt have to start from 0 , i just wanna swap the card and boot to my hack (so i dont have reinstall apps, config, plug in etc) hopefully this posible.

my question is :

6. how do i do that? i tried agdpmod=pikera and it didnt work. im clueless here with all my parts laying around at my table.

any help would be so much appriciated. attach my EFI below

sorry for my bad english,thx before.
 

Attachments

  • EFI.zip
    22.9 MB · Views: 18
Last edited:
Joined
Feb 9, 2017
Messages
79
Motherboard
Gigabyte GA-Z390M Gaming x
CPU
i7-8700
Graphics
Asus rog strix Rx 5700 xt
Mac
  1. iMac
Mobile Phone
  1. iOS
Now things are getting a little bit messy. My installation was made with a gt 710. Doing some kext updates with hackintool, Catalina won't boot again. Doing some searches I started with a fresh installation.
And I cannot boot to the installer. I managed to update lilu and weg on the usb installer and using agdpmod=pikera I can get to the installer. Erase the drive as afps and the sistema starts installing and then reboots.
And here's where I enter into a loop. Every time I select install from Catalina it keeps installing the restarting and back to the same place.
Any ideas ?
Forget about his. I removed Al my hard drives except for the ssd and with adgpmod=pikera I managed to finish the installation. After multibeast no longer needed for boot.
 
Joined
Feb 9, 2017
Messages
79
Motherboard
Gigabyte GA-Z390M Gaming x
CPU
i7-8700
Graphics
Asus rog strix Rx 5700 xt
Mac
  1. iMac
Mobile Phone
  1. iOS
hi everyone, i comes from this thread
and my hack also follow that guide:

my Z390i build with radeon VII and all of its issue coreaudio problems, WEG, SMBIOS and all of that jazz

luckly, right now i already sold my radeon VII. and replace it with sapphire RX 5700xtt nitro+ in hand.
and 6 hours ish to spare today.

so my condition is :

1.my ssd still on catalina cloverEFI
2. imacpro smbios
3. didnt have WEG and LILU ( i remove that for radeon VII based on reseaching this forum.
3b. i added back WEG and LILU withinmy windows partition.
4. igpu enable, with PEG.

and i tried install rx 5700xt, with agdpmod=pikera -v
and got nothing , my hack just restarted right to bios/boot screen

with -v, this the last line before it restart itself :
View attachment 483437

my goal is :

5. i didnt have to start from 0 , i just wanna swap the card and boot to my hack (so i dont have reinstall apps, config, plug in etc) hopefully this posible.

my question is :

6. how do i do that? i tried agdpmod=pikera and it didnt work. im clueless here with all my parts laying around at my table.

any help would be so much appriciated. attach my EFI below

sorry for my bad english,thx before.
Have you tried updating lilu and weg?
Abrazo
 
Joined
Aug 2, 2020
Messages
6
Motherboard
Gigabyte GA-Z97X-UD5H-BK
CPU
i7 4790k
Graphics
5700 XT
Mac
  1. iMac
  2. MacBook Air
  3. MacBook Pro
I discovered something today that may help others. I was stuck on Catalina w/5700 XT for many days this week.

People have said before to make sure injectATI is set to false. There was nothing in Clover Configurator that indicated it was set to true, but in config.plist itself, there was nothing declared.

MAKE SURE you have an explicit declaration saying injectATI is false in your config.plist!
 
Joined
Oct 10, 2011
Messages
60
Motherboard
Gigabyte GA-Z170X-UD5
CPU
i7-6700
Graphics
MSI RX 580
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
I discovered something today that may help others. I was stuck on Catalina w/5700 XT for many days this week.

People have said before to make sure injectATI is set to false. There was nothing in Clover Configurator that indicated it was set to true, but in config.plist itself, there was nothing declared.

MAKE SURE you have an explicit declaration saying injectATI is false in your config.plist!

Could you explain exactly how to add an "explicit declaration saying injectATI is false". I have the Inject ATI unchecked, but sounds like there's a bootflag or something I need to add in order to set it as false? Thanks
 
Joined
Aug 2, 2020
Messages
6
Motherboard
Gigabyte GA-Z97X-UD5H-BK
CPU
i7 4790k
Graphics
5700 XT
Mac
  1. iMac
  2. MacBook Air
  3. MacBook Pro
Could you explain exactly how to add an "explicit declaration saying injectATI is false". I have the Inject ATI unchecked, but sounds like there's a bootflag or something I need to add in order to set it as false? Thanks

Disclaimer: I'm a bit of a newbie so there's a chance that this advice is either wrong or unhelpful!

Open your config.plist in a text editor. Under graphics, look for 'Graphics'. In my case it looked like this:
Code:
<key>Graphics</key>
<dict>
  <key>Inject</key>
  <dict>
    <key>Intel</key>
    <false/>
  </dict>
</dict>

Add an entry for ATI so it looks like this:
Code:
<key>Graphics</key>
<dict>
  <key>Inject</key>
  <dict>
    <key>ATI</key>
    <false/>
    <key>Intel</key>
    <false/>
  </dict>
</dict>
 
Joined
Jun 4, 2017
Messages
92
Motherboard
Asus X299 WS SAGE
CPU
i9 10940x
Graphics
vega 64
Have anyone solved problem with cursor lagging every two seconds ? I have AMD RadeonPro W5500 (which is navi-based). It have the same problems which 5700 XT have.
 
Top