wake

Hi there. So as the title says, i upgraded through a clean install, from yosemite which had sleep and wake working 100% (excluding the eadp requiring codec commander), without any kexts or patches, whilst in el capitan, it sleeps fine but then when it wakes up, the monitor is not awaken at all...

Since upgrading to 10.11, my computer has been having trouble waking up. It will go to sleep normally, and I can wake it with BT (IOGear GBU521) Apple Keyboard/Mouse. However, The display won't receive any signal from my HD6850 and USB won't work (since I have a USB audio adapter, I tested USB...

Hello, I have a Lenovo Y510p and I used to use the patch to remove _PRW method from LID0 to allow sleep on LID-close. To the best of my knowledge, I know that removing this method will result in disabling wake on LID-open permanently. However, today I found that wake on LID-open (with the...

Hi, I’m looking for some leads on how to address this problem which requires hard resets on my machine and resulting lengthy safe-mode reboots and potential knock-on issues (disk catalogue corruption etc.). Symptoms as follows: • Wake machine from sleep with a key press after manually...

Hey, I recently installed Yosemite 10.10.3 on my pc. Everything is working except when I wake it from sleep it freezes and I have to reboot it. I looked into the console log but can't find anything I can solve. Can anyone tell me what is wrong? To get this log I Booted my pc and just let it go...

USB drives Not Ejected Properly on wake from sleep. [Yet another solution] I wrote a applescript app to install sleepwatcher and eject + mount scripts that affect only USB and USB 3 drives. I did this because I don't like that Jettison.app messes with SATA drives too. I have my hot swap bays...

Hi, When osx goes into sleep mode I have black screen and when i touch a key nothing happens i'm unable to wake up from sleep. Note: I installed a dsdt aml file of my MB i found here. Maybe I should reinstall from Multibeast

Hi everyone ! I installed Yosemite on my Brix Pro (GB-BXi7-4770R)... I followed this guide to get my hackintosh fully functional, but with some features missing... https://eexe1.wordpress.com/2015/02/04/update-brix-10-9-to-10-10-yosemite/ After following the tutorial I used Multibeast to...

Hi, I'm having a problem with my hackintosh. When I try to wake my computer from sleep it posts no problem, the screen starts as well but no image just a black screen or a snowy image. The monitor (Asus mx279) is connected through HDMI. The monitors indicator light becomes white after tapping...

Hi everyone, This is my first request for help. I have tried many attempts to make Yosemite work on this ASrock board. Board model: B75M-DGS R2.0 Problem: Sleeps perfectly well after about 20 seconds, but randomly exhibit SIGFPE (Floating Point Exception) on random applications. This happens...

Hey! Been having problems with my audio since I updated to 10.10. This is never an issue I ran into when was running 10.8. Never used 10.9 so I don't know what would have happened but have heard people experiencing issues there too. What is happening is that after sleep my computer's audio...

I just recently switched to Clover and have been trying to get sleep to work with my board. It's probably been since Lion that I've actually had machine that properly wakes with a keyboard or mouse click, so I'm hoping there is some solution out there. Upon installing Yosemite I think I'm worse...

Hi all, I've got another build that I'm working on, and I've run into a few problems. If I put the computer to sleep for the night, the next day a few minutes after I wake it up it will reboot out of nowhere. After reboot, it'll print the message saying "You restarted your computer because of a...

Hi everyone, I have recently built my Hackintosh here are my specs: MSI Z87-G43 Motherboard (patched BIOS) Intel Core i7 4770 processor Gskill RipJawsX 4GB RAM Samsung EVO 120GB SSD I had successfully installed Yosemite 10.10 and now successfully upgraded to 10.10.1 update. I'm using...

Hey guys, I know that there are already loads of topics regarding this problem. After 10 hours of trying different settings and configurations I did not come any further. My problem is that sleep sometimes ends in a black screen after waking the system, however, sometimes it works. My setup...

Hi guys, I have some sleep wake issues on my New Yosemite Install, I have gotten a OS X Mavericks Install to function properly on darkwake=0 but this time around I have tried values 0, 1, 2, 8, and 10 with no luck. I have installed the AppleRTC patch but it keeps rebooting after 15 mins into...

Hello, after installing Yosemite, I have no sound after the computer wakes up from sleep. Also, I've had to install an older driver from a previous version of Multibeast for sound to work. Any one else having this issue? Thanks.

Everything worked without a problem on Mavericks. Now, when I try to put the computer in sleep mode the only thing that happens is that the screen goes black. The computer itself is not going into sleep mode. It just keeps running with a black screen. When I try to get the screen back, it stay's...

HP Probook sleep wake-up taking long (since about 10.9.4, back in 10.9.5 after latest security & PBI 6.2.15.4.2) Hi there, I've previously mentioned a p problem where my Probook 470-G0 takes about 2minutes to wake up from sleep. Having reinstalled and played around with settings, it...

Hi. So I have followed this guide to generate relevant DSDT and SSDTs for my laptop: http://www.tonymacx86.com/mavericks-laptop-support/129146-osx-mavericks-hackintosh-install-sony-vaio-pro-13-a.html I am unable to get my laptop to stay in sleep and wake properly. It appears to go into sleep...