Recently finished a hackintosh build and have been struggling with the wifi card. AirportAtheros40 kext won't load, and the wifi icon in the menu bar is not appearing and the wifi config pane in preferences -> network won't appear. Ethernet works.
My specs are -
Hi guys, i just received my new Blackmagic Intensity Pro 4K PCIE card.
The problem is that when the blackmagic is plugged my TP-Link wifi card is not recognized anymore. Without the Blackmagic it works perfectly.
Any ideas ?
Blackmagic Intensity pro 4K plugged on PCIEX4...
[SOLVED] Wi-Fi: No hardware installed (IO80211Family not loaded)
i've been struggling with this for a long time so im finally here to ask for help.
I'm running Yosemite 10.10.2 with uni/multi beast install for about 5 months now. Everything is working great thanks to this exceptional...
First of all, I am a newbie to the forum, and to “hackintoshing.” Thank you to tonymac & all of the enthusiasts that have put so much time and energy into building a cohesive hackintoshing community. Without the guides and forums on this website, I could not have built my first hackintosh!
I just got this new wifi card, the TL-WDN4800, for my mackintosh running Yosemite. Everything is from the November build guide of 2014.
When the card is installed, the clover splash boots slower than usual and then after I chose the disk I want, kernel panic.
I was told this works out of the...
Friends, I have a TL-WDN4800 stuck in GA-H77-DS3H. Yosemite running. I applied the "Atheros-Shailua's ALX Ethernet" from Multibest, as suggested in a post here.
The problem is that the Wifi signal reaches only 27% and keep the speed at a maximum of 30MB. On Windows 8, it gets 93% and 140MB...
I recently built my first Hackintosh comprised almost entirely of parts listed in the Buyer's Guide. Everything installed without a problem, and seems to be up and running, except for the Wifi card. It will randomly drop its connection every 10-30 minutes on average. It still shows as connected...
I finally finished setting up my hackintosh via many of the guides on this website. After days of troubleshooting and beating down different issues, there is now one issue that I cannot seem to resolve:
My download speeds using this WiFi card are hovering around 150 KBps, whereas...
Can someone please help me?!!
I'm very tired of searching for a solution from the following:
I have the Gigabyte. GA-B75M D3H 1.0
I saw that the TP-Link TL-WDN4800 wifi network pcie card was compatible with this motherboard
Now here's the problem:
When I put the card in the...
I am having this problem where I can connect to a network, browse for about 5 minutes and then I lose all connectivity even though the network remains connected. Turn wi-fi on/off will fix this problem but I have to do it every 5 minutes. Does anyone have any experience with this kind of issue?
I have built my hackintosh a little over 2 month ago. During that 2 month, everything worked like a charm. I have the apple airport extreme as my wifi-station and have the 100mbit (download)/ 10 mbit (upload) connection from my isp. The my hackintosh was connected to the airport extreme via 5Ghz...
Just built my first hackintosh and am having troubling issues with the TL-WDN4800 that is supposed to work out of box. Basically what happens is upon a fresh start the network seems to work fine for a while but the connection slowly deteriorates over time. I have tried two different routers...
I have a tl-wdn4800 but in my 10.8.2 install is says Wi-Fi no hardware installed.
When I boot up from my installation USB it does work!!
I installed the Atheros Network driver. What do I wrong on my own install?
How can I fix this?
I have been trying for days, and for the life of me cannot get my TL-WDN4800 to work properly. It shows up fine in the system information:
Card Type: AirPort Extreme (0x168C, 0x3112)
Firmware Version: Atheros 9380: 18.104.22.168-P2P
MAC Address: 36:70:02:18:g7:11d
I had a lot of problem but I fixed them all myself.
I didn't had a lot of support on this forum so I thought I'll help others with these problems.
*1) If you have the wifi card TL-WDN4800 you must first take it out the hackintosh and later if everything is...
GA-Z68MA-D2H-B3, Core i-5 2500K, 16G Kingston memory, TL-WDN4800 wifi card, Belkin Bluetooth dongle, on-board HD 3000 graphics.
I upgraded successfully, using UniBeast 1.5.2 and then the DSDT in the database for my Bios (MB rev 1.0, Bios V= F9). A few bugs though:
- Bios resets from invalid...