Im currently running on
gigabyte z87x-ud3h
Intel I7 4770 3.4ghz
16gb DDR3
80gb intel ssd
using integrated intel hd 4600 graphics
so i got yosemite to boot up but every time i try to click on a window it partially loads and mouse can become skippy and laggy
if any of you could help me...
Hello everyone,i am Chris from Greece,i was reading this forum for a long time before i end up on this configuration.
Cpu i7 4790
Ram Corsair Ven 8GB 1600
SSD samsung evo 850 256gb
1T toshiba
and this headache Gigabyte z97-hd3 with F6 firmware.
I don't have A graphics card,and i want to use the...
Hello there, I am having some problems with HD 4600 Mobile and getting QE/CI enabled.
My org.chameleon.boot.plist shows this:
And here is my ioreg:
I have tried to patch with Pikes guide but still no QE/CI
Hey everyone, i'm running mavericks (booted with chimera) on a ga z87-hd3 equipped with an i5 4570. This setup is connected to my tv via hdmi and to an old monitor via dvi. Whenever i boot up my system, i get weird screen errors, which you can see in the video below. I've searched the forum and...
There are successful builds with only the onboard HD 4600, for example Ryan's build. Is there any reason why a hackintosh couldn't drive 3 (or least 2) monitors given both (A) appropriate integrated GPU and (B) MB's video outputs? Also, how well does daisy-chaining two DP monitors work with a...
Hi!
I'm looking to upgrade my hardware one day, and I will use it with Seiki 4K TV (the cheapest one).
Right now I have Ivy Bridge Xeon E3 and GTX 660, my friend wants to buy this hardware, and I will move to Haswell Refresh CPU without discrete GPU, for the sake of silence and lower power...
Hi everyone,
This is my first thread but I've been around for a while now, so I'd like to thank everyone for the help I found here during the past years!
I installed Mavericks recently, updated to 10.9.2, got sound and network working after patched kernels, Multibeast help and more. I...
Hello.
Recently I've been trying really hard to learn how to install OSX on my laptop.
I have created a bootable USB following this tutorial: http://www.tonymacx86.com/374-unibeast-install-os-x-mavericks-any-supported-intel-based-pc.html
Than I had a problem with early restart, so I found this...
I have tried every trick I can find to get graphic acceleration working on my new laptop running 10.9.1, but to no avail. I've set IPGEnabler to Yes in my org.chameleon.Boot.plist file, I've run through all the IGPlaformID values for HD 4600 listed at...
EDIT: Issue was solved, used unibeast to re-install Mavericks and worked right away. thanks
Mobo: GA-Z87m-D3H
Processor: I7-4770k
Ram: Corsair Vengeance LP 2x4
SMBios= Mac Pro 3,1
OS= Mavricks 10.9
Video out = HDMI, i dont think it matters for my problem
Computer works great, clocked at...
Hello,
I am facing a problem with my system as I have installed everything correctly but after booting to OSX 10.9 Mavericks I am getting white noise screen for few seconds after apple boot logo. I have tested both HDMI connections on my GA-H87-WIFI motherboard and both having same problem. I...
Hey!
I get stuck at [IOBluetoothHCIController][SearchForTransportEventTimeOutHandler] -- Missing Bluetooth Controller Transport! while booting normally from my hdd.It boots only in safe mode.Here's my rig:
Processor: Intel i5 4670k
Motherboard: Gigabyte GA-Z87-D3HP
Graphics:Intel HD...
CPU: Intel i5-4670k
GPU: Intel HD 4600
Motherboard: Asus z87-a
PSU: Corsair CX 750w
RAM: Kingston 2x4gb 1600mhz
So i boot up mac os x mavericks and it passes the apple loading screen then screen turns off and displays "Frequency Out Of Range", But i know for sure the USB is still active...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.