Ηello guys i need your help.
I installed Mac OS High Sierra 10.13.6 before 2 day on my HP Compaq 8300 Elite, this installation was difficult for me because it was my first. Μany thanks to the tonymacx Forum for the information and the steps they gave me for the installation. I dont know from...
There are now quite a few posts about this issue going back a few years now. Here are some:
https://www.tonymacx86.com/threads/intel-hd630-dual-monitor-support.295303/
https://www.tonymacx86.com/threads/intel-hd630-dual-monitor-on-desktop-i7-7700k.238839/...
I successfully installed Sierra on the Citrix NetScaler MPX 10500 (DUAL QUAD Intel E5450) 32 GB RAM, using internal Nvidia 4000 graphics.
1) Be sure to remove any CRYPTO Boards... not needed.
I left the 2 x 4 port 1Gb SFP port boards and the 1 x 1dual 10Gb ports.
2) Made installer USB from...
Hi anyone can help me having a dual black screen on my monitor when plugging the second monitor. Got an old video card is this card doesn't support dual-screen? I'm using Intel HD 530 before with Lilu and whatever green. Mojave 10.14.6 Thank you
Hi, I formatted my windows partitions (all, efi, recovery etc). But I did not touch my macOS partition. (it's on the same disk). Now, after installing fresh windows 10, when I start my PC, it instantly goes to windows. Tried all available boot devices and no one booting into clover. I can't even...
Hi everyone,
Can someone help me out here:
I have everything working on my new Lenovo M920x that runs Q370 chipset, got an fully working DSDT the only thing im missing is the HDMI port so i can get dual monitors. The DP is working perfectly :)
SMBIOS is set to iMac 18,1 since it's an Coffee...
Hi
I have an HP Elitedesk 800 g3, i5 7500 processor with an intel hd 630
now i have two monitors. and the output on the hp elitedesk 800 g3 takes 2xdisplayports and 1xvga
Everytime i connect my second monitor it it hangs after running the verbose on boot and restarts.
I have tried different...
Hello there,
I have a workstation with two Nvidia GPU. I run on High Sierra 10.13.6 and everything was fine until I added my second GPU (GTX 1060).
I use it for 3D render, not for gaming or SLi etc.
MacOs is very fluid, but when I use Cinema4D or Houdini the viewport is very slow. I have...
The last 6 months I worked with Dual RX 580's in my system, everything worked perfect. Optimal performance in FCPX: two cards were used including quicksync. Then I decided to upgrade to a Vega 64. Everything was perfect, slightly better performance than the Dual RX 580. I wanted more...
Hi Guys,
I have been using a Hackintosh which runs Yosemite (version 10.10.5) for a number years now that has been partitioned on a 250GB SSD to allow me to install Windows X at a later date. Today I managed to install Windows X onto the partition reserved for my widows install but now when I...
Hello!
I use a MSI Z77A-G45 Thunderbolt motherboard and have a i5-3570K @ 4.2 Ghz processor. The two graphics cards I'm using are the GTX 1080 Ti and GTX 1070 Ti. I use octane render with Cinema 4D for a lot fo my work and need the extra GPU power. Whenever I have both cards plugged in at the...
Hiya,
I tried looking on Google and this forum for answers but couldn't find any. When booted into MacOS I can connect my second monitor and then it works again. With both monitors plugged in while booting I get black screen.
Nvidia Driver:
387.10.10.10.40.108
MacOS Version:
10.13.6 17G3025...
Hi !
I really need help to understand what is going wrong with my setup.
During 2 years I was on macOS Sierra and everything was fine, I use this workstation to work everyday, but I had to update to High Sierra due a software update. Of course I did a fresh install for macOS High Sierra (based...
Hey all, this is my first post, so bear with me!
I've been running my current setup for about 6 months and I'm super happy with it!
I followed this guide https://www.tonymacx86.com/threads/guide-hp-6300-pro-hp-8300-elite-a-100-percent-working-and-easily-affordable-customac.224812/...
Hello there :)
I'm new to this Hackintosh world and I've been reading the stickies and other useful threads to make it work properly. I already have the USB with High Sierra (did it with UniBeast) and all was just fine.
I have a single SSD disk which already has Windows 10 and noticed that...
Terribly happy with everything so far, all is working correctly and I‘ve done my fair share of research from the beginning of the project, so I‘m happy with the results.
I‘ve had some minor inconveniences, like thunderbolt not working, but it‘s not a huge deal for now since it‘s not something...
I have just installed macOS High Sierra, everything works with, but second monitor connected via HDMI didn't found. How can I add HDMI support to my hackintosh?
I'm new to building my own machine and can't wait any longer for the new Mac Pro to be released. I need to a machine that can handle 3D graphics (Maya dn C4D) as well as After Effects, Premiere etc often simultaneously.
I'm trying to build:
dual CPU (i7 770K) / 64-128GB RAM / Nvidia K5000 GPU...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.