I have a working macOS Catalina 10.15 Hackintosh on my Acer Predator Helios 300 (i5-8300H / UHD630).
Only Bluetooth Device is not detecting in the case of EC0 enabled.
Whenever Device (EC0) is enabled in DSDT, Bluetooth not detected to macOS.
If I disable Device (EC0) using Method (_STA)...
I'm trying to get my bluetooth usb unit to work, even though it should work.
I'm on high sierra due to my GTX 1060.
I've got an internal Intel Wi-Fi/Bluetooth card (Intel Dual Band Wireless-AC 8265), could it be interfering somehow?
I've tried putting it in another usb port, usb2 and...
GIGABYTE GA-Z170X-UD5 (rev. 1.0) Help
CORSAIR Vengeance LPX 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 2666 (PC4 21300) Desktop Memory Model CMK16GX4M2A2666C16
Intel Core i7-6700K 8M Skylake Quad-Core 4.0 GHz
Nvidia GTX 670 (This will be used after install due to needing web drivers and coda drivers...
Hey everyone, this is my first attempt at building a hackintosh. I followed the basic guide, setting up my USB device with Unibeast. Then i followed this guide:
because I am running a skylake...
[SOLVED] OS X 10.11 boots one time, then never again (Bluetooth Controller Transport)
I've got a mysterious error with my Hackintosh (GA-Z79-mx Gaming 5, i5-4670k, gtx 960 OC).
There are no problems with installation, it boots absolutely normaly after that.
I did alle the...
I am get stuck at the Apple logo loading bar. Here is an image of the screen when it gets hung up:
If I leave the machine alone, it suddenly shuts off after about 30 minutes, and then immediately turns back on, but does not output any video.
Here are my specs:
I am in demise, please help!!!
I have two laptops xps 17 and xps 15 (system specs in signature)
I made a clover installer using the "installing osx with clover guide"
now I have faced the issue "Missing Bluetooth Controller transport" on both laptops.
I have done some research...
Here are some basic details
Mobo - Asus Z97A
Graphics Card - Gigabyte G1 GTX970
Processor - i7 4790K
Issue : I successfully installed Yosemite using unibeast and multibeast. was able to boot into the system and install Nvidia Drivers, ethernet sound etc everything was working
First of all let me apologise for my total lack of knowledge on mac and linx (so some of the following descriptions will seem amateurish), I am just a desperate guy trying to resolve my Hackintosh problem that I didn't participate setting up, and may I thank in advance for all the help from...
Hey guys, I'm trying to install Yosemite with clover, but when I first boot into "install_osx" drive screen freezes at roughly 40%. Booted it with verbose and I'm getting "Missing bluetooth controller transport" message and it doesn't do anything after that.
I have Acer Aspire S7-392-9439...
Help Boot Flags for EVGA GeForce GTX 750Ti
Yesterday I assembled my new computer and was able to turn it on and boot up the BIOS options. I selected the optimized defaults for the setup. And tried to boot the computer from a USB drive containing Yosemite, the exact way it says to set it up on...
x = check mark
;( = problem area
Mobo: Gigabyte x99 UD4
CPU: intel Core i7 5820k
GPU: reference gtx 980
RAM: 32gb dd4 2133mhz - crucial
Steps I've Taken
1. Created UniBeast Boot. [x]
2. Installed OS X 10.10.0 onto a GUID Drive. [x]
3. Changed the kext for x99...
I've been having this error for the past week and have been trying to fix it. I've looked at every thread I could find on the internet. Basically what happens is ill boot and it will get stuck at DSMOS has arrived. Note that 1) it doesn't freeze, it'll just sit there and 2) it completely stops...
I've been building my second hackintosh today inside a G3 iMac case. The build goes well but I can't install Mavericks.
I've booted using -v -x -f GraphicsEnabler=Yes/No ncpi=0x3000 IGPEnabler=Yes/No dart=0 and combinations of the above.
The boot always hangs at ****...