"Missing Bluetooth Controller Transport" x99 UD4 GTX 980

[Gunnarxg]

(-LEGEND-)

x = check mark
;( = problem area

Hardware

Mobo: Gigabyte x99 UD4
CPU: intel Core i7 5820k
GPU: reference gtx 980
RAM: 32gb dd4 2133mhz - crucial

Steps I've Taken

1. Created UniBeast Boot. [x]
2. Installed OS X 10.10.0 onto a GUID Drive. [x]
3. Changed the kext for x99 cpus. [x]
4. Finished Setup of OS X 10.10.0 on the GUID Drive. [x]
5. Cloned the GUID drive to MBR drive. [x]
6. Restarting on the MBR Drive [x]
7. Ran multibeast, installed "mac pro 6" [x]
8. Ran multibeast, installed VooDooHex thingy, and Chimera[x]
9. Installed nVidia web drivers for OS X 10.10.0 [x]
10. Boot using the MBR Drive [;(]



The system hangs at

Current boot flags being used: npci=0x2000 pcirootuid=0 kext-dev-mode=1

"Missing Bluetooth Controller Transport"

 

[w4d3]

according to a few posts i've seen it looks like it COULD be gfx card related and for some reason requires moving some kexts.

You can successfully boot -x on the USB installer but not on the new installation on the hard drive?

When you boot -v on the new installation on the hard drive, it hangs at the bluetooth message, but that isn't what is hanging your boot. It is the HD4600 graphics.

If you can't boot -x on the hard drive, then you will need to remove the AppleIntelHD* and AppleIntelF* kexts from the installation on the hard drive. You can do this from single user mode (-s).

Boot -s. When you see the prompt "root:", then:

Type: mount -uw /
Type: cd /System/Library/Extensions
Type: mkdir intel_back
Type: mv AppleIntelHD* AppleIntelF* intel_back/
Type: touch ../Extensions
Reboot -v

and

Boot with -s. When you see the prompt "root:":

Type: mount -uw /
Type: cd /System/Library/Extensions
Type: mkdir intel_back
Type: mv AppleIntelHD* AppleIntelF* intel_back/
Type: touch ../Extensions

Reboot and use -v flag.

Hope this helps as im trying to build a system similar to yours in a few weeks.

 

[Gunnarxg]

I got it fixed, It was a gfx issue. Thank you <3

 

[luchazo]

I got it fixed, It was a gfx issue. Thank you <3

Hi,
Were you able to install OSX 10.10 with the GTX 980 on it?
I cannot pass from the bluetooth error message.
(I can only complete the isntall on my X99 if I use another card for the installation)
Thanks

 

[Davirus]

I got it fixed, It was a gfx issue. Thank you <3

how you fix it?

You come asking for help but you wont post the solution? really?