Search results

I finally made the switch to OS X High Sierra and installed the current version 10.13.3. using the installation guide provided here on Tonymacx86. So far so good, as it always worked in the past. I managed to prep the installer usb stick and followed the guidelines, managed to get the system up...

Sorry, :( still not working, having same issue. Could you send me your .plist, so I can compare the placement of the code. Maybe I have it placed kind of wrong, however I am able to install OS X on the m.2. Thx

Thx, All for the tips. Will check the advice and will let U know if it works on my built. :)

I started upgrade my hackintosh project by adding a m.2 500 GIG Samsung NVMe SSD. Finding all the right tips and info to make the installation work is quite a bit of work. After doing some research I got the USB thump made and was able to install the Sierra OS on my m.2 SSD. Now I have the...

I disabled the Nvidia Injection via Clover Configurator and the memory is now showing. Thanks for the info about the fans, my impression was that they are not working since the card comes with an app for windows where you can control the OC and fan speeds and this option is not available for OS...

I just got a new Graphics Card, my installation is starting up, however the oncard memory is not showing and the cards fan's stop rotation after the installation is booted into OS X. At this point I have no clue why this is happening. I installed the latest version of the NVIDIA Web Driver...

I installed the kext files according to the instructions, but that did not work. After that, I added the two patches as mentioned in the USB fix post. This made my Hackintosh crash during boot up, so I had to remove the patches. I have now two USB 3 ports running, on a x3 USB 3.0 hub that...

Now that MultiBeast 8.0 for El Capitan was released I made the effort to install 10.11.1 on my hackintosh built that was running OS Yosemite to my satisfaction. I did try to install El Captain earlier, just with Clover, but did not get it to work, mostly because of my Graphics card: Point of...

I got 10.10 now running: - Download 10.10 Yosemite via App Store onto your NON Hackintosch Mac. - Connect your SSD/HD to your NON Hackintosh Mac via USB HD Caddy, that holds the internal HD that you want to use in your Hackintosh. - Open OSX 10.10 installer located in your APP folder...

Thank you for your tip. However the KextGenericUSBXCI.kext is nowhere to be found on my Yosemite installation: System/Library/Extensions. I did find it on my 10.9 installation in the right place:System/Library/Extensions and copied it to 10.10. in the hopes it would solve the problem. After...

This main board was already very tricky to work around with on Mavericks, Yosemite seems to be even a higher challenge. After various attempts I was able to load the installer, install 10.10 and boot from the SSD into Yosemite. I can reach the log-in screen, but mouse and keyboard are not...

No, I'm using my own mailserver via Godaddy, no Gmail. Mail was working fine, but after using 'CleanMyMac', it will crash right after start, I can see the Mailinterface for one second, then it crashes.

Not sure what went wrong, but MAIL crashed on my Mavericks built. Any help is appreciated, my only way to fix is is to reinstall the system....I just don't want to do it, any timesaving tip is welcome! PLZ check attachment for error report.

PLUS, I need to mention that the CPU Frequencies change between 1.58 GHz and 3.27 GHZ

After installing the HW Monitor on my 10.9 built I noticed that the PCH Die temperature is far to high on computer idle or load it stays at 127 Degrees Celsius. The main board is brand new....is it possible that some sort of kext miss installment leads to this temperature reading?

Same here, can't get any further, the black screen/monitor shut off will kick in before I can reach the installer

No Luck here .... After getting the Chimera Boot Screen and selecting the Mavericks Installer/Logo I'm getting the grey Apple screen with the Apple logo and the rotating ring below it, but the screen then just turns black. I tried various Boot options such as: GraphicsEnabler=Yes and...

Ahhh ! Thanks. Just ordered the i5 2500K,since I have no space to install any Graphics card in the case I choose for my Built.

I'm working on my 2nd Hackintosh Built, after the 1st one turned out to work very well for me. This time however it's turning out to be somewhat of a nightmare. I decided to buy the GigaByte H61N-USB3 Mainboard, as recommended on this site. When booting from the USB Stick, I do get to the point...

Thanks! I will sell the i5 Ivy bridge chip on eBay and replace it with an i5 Sandy Bridge one in order to avoid installing a video card, due to lack of space in my case.