Search results

I would say: System Info/graphics cards should be populated with both: your Graphics Card and the internal graphics System Info/PCI should only hold your graphics card So I would use this Platform-ID You should also check this resource for more Options on what framebuffers you could choose. For...

Hey Nodark-things: indexes change depending on your system-definition. So for now: If you have 0,2,3,4 this is fine. From what I understood, macOS can only drive 3 Monitors max. The question is: Does one of your Indexes turn red within Hackintools-Patch-Area? If so: You are pretty good to go...

To hard to tell... What OS are you using? And does this also happen, if you remove the external graphics-card?

Well patching the connectors can be a trial and error game. I sometimes had no red-line coming up sometimes all were red. Make sure, you have another computer ready, to undo your changes, if you end up with a screenlock. From there on, you go step by step forward and patch one connector after...

That's interesting: Which systemdefinition were you using with that? I use iMac 14,2 and BS won't install there anyway. However I managed to patch my monitors so they show full resolution with the backdraw that I have to unplug one of them if I reboot. The problem has something to do with the...

First thing would be to find out, what prevents your system going to sleep. I recently updated to Catalina and I have quite some stuff, within my activity-monitor, that is able to prevent my system to go to sleep. So fire up activity-monitor and display the "prevents sleep" column and have a...

I started with OpenCore and it runs Catalina fine for me. BT, Wireless, Airdrop all work fine. However I still can't get the Displays to connect properly (one has a HDMI-Speaker, which was enabled right away, when I used Clover). I'm having real problems with doing the framebuffer-patch for...

Yes, but how do I change boot priorities then? Sorry, if that is a dumb question. I would have 3 Clover-Bootloaders then: 1. from my current SATA-Drive. 2. from my USB-Test-Installation 3. from the PCIE-Drive Or will disabling all Entries in the Bootorder within the BIOS do the trick then...

I'm also stuck at this state... No boot - only with the bare Unibeast-Installer I can boot to 10.15.3

I'm also curious.

I also can confirm, that the h97m-itx works ok with Catalina. I just hat to redo my Clover-Configuration. With Whatevergreen it becomes a lot simpler. however, I still have "problems" with dual-monitor and waking from sleep...

I've tried a Samsung EVO 950 with a PCIE-Adapter, but it doesn't work as expected. It does not show up as a Drive in the latest BIOS of this board. (v 2.0) - that is just calling for problems, if you ask my opinion. I'm currently updating to Catalina and have to switch bootloaders quite...

Have you checked if AppleLPC.kext is loaded? fire up Terminal and use kextstat Then search for com.apple.driver.AppleLPC If it is present, your Powerbutton should work. Otherwise try switching on FakeLP in Clovers Acpi-Settings.

I'm currently switching from El Capitan 10.11 to 10.14 and also experience Sleep-Wake Problems. System goes to sleep, but can't be woken up again without a hard reboot. But my installation has other problems too, like USB not loading the iPad and my Wireless-Card is semi-functional. I watched...

Not sure about that, but you could copy the files from your USB-installer. They should be fine, as you used them for installation.

Try to find clues in your console log. There should be an entry what caused the end of low power - or prevented it.

I'm still having the issue. Tried it with removed Wifi-BT-Card (AW-CB160H). Today I upgraded to 10.14.1 and the issue is still there. I already set PluginType-switch. Hm. Didn't have time to investigate further. I don't have a USB-Pin-connector though - at least, I haven't seen on on the card...

I also tried out the final version of mojave and have the same issue. Setting displays to sleep works fine but telling the system to sleep takes the system to sleep, but waking results in a panic an reboot. I also had this problem with El Capitan, which is my current working platform. (10.11.6)...

I currently work with two monitors and one is the Cinema Display with 1920*1080 with only a DVI-Connector. The other one is an Iiyama ProLite XUB2792QSU with 2560*1440 over HDMI. The only work correctly, if I use an adapter on both of them. If I plug in the Cinemadisplay to the DVI-Port and the...

I spent the couple of days to fix the remaining issues with my little Asrock Cube and managed to map the USB-ports correctly with a handmade USB-Injector Kext and finally get the powerbutton to work including the system to properly go to sleep and wake up. So here are the is the Clover...