Recent content by Big-W

  1. Big-W

    SOS! NVRAM cleaning issue Asus ROG STRIX Z390-E Gaming - i9-9900k

    Click the build link in my signature, ModMike has EFI folders both for Clover and OpenCore, but not for same mobo, you should sort out USB port maps yourself. It will get you installed provided you have the correct settings in BIOS, which are all in the build post.
  2. Big-W

    SOS! NVRAM cleaning issue Asus ROG STRIX Z390-E Gaming - i9-9900k

    Sounds like your boot order has changed and not booting from your OSX disk. Just change it in bios.
  3. Big-W

    Catalina 10.15.5 Shows Intel UHD 630 7mb

    Ensure you have more than 64mb allocated to graphics memory in bios.
  4. Big-W

    Stuck on boot screen with virtual IO Return/apfs_module_start: 1683 error

    More info needed. Have you managed to install Catalina? Your config.plist is not complete, choose correct SMBIOS for your hardware, I suggest iMac19,1. No acpi or usb patches (don't use ssdt-usbx.sml until you have completed install) or usbinjectall.kext. Click on the build link in my signature...
  5. Big-W

    Stuck on boot screen with virtual IO Return/apfs_module_start: 1683 error

    Nvidia 2060 not supported and unlikely ever will be.
  6. Big-W

    Catalina Installer keep Reboot at "13 minutes remaining"

    https://www.tonymacx86.com/threads/gigabyte-z390-m-gaming-build-with-working-nvram.291193/
  7. Big-W

    Solved > AppleNVMe Assert failed - Asus Z390e-Gaming

    Check you have updated firmware for the nvme drives. Samsung magician software can do this easily in windows.
  8. Big-W

    Solved > using ModMike's TEWB install freezes on [ PCI configuration end, bridges 5, devices 12 ]

    I'm working on the premise that you have created your USB installer with another hackintosh or real mac. If you haven't already, download clover configurator to your hack/mac. Mount your usb efi partition open your config.plist with CC Go to acpi section click the '+' button click in the...
  9. Big-W

    Solved > 10.15.5 Clover does not detect the installation volume.

    Glad you got it sorted :thumbup: If you have rogue entries, in your boot order you can edit them from efi shell so you only have the entries you require; Boot to EFI Shell at Clover screen Type - bcfg boot dump -b Type - bcfg rm # (number of unwanted boot entry) to remove unwanted boot entry I...
  10. Big-W

    Solved > clover doesn't detect my ssd with macOS.

    At Clover screen, press F11 and clear your NVRAM.
  11. Big-W

    Solved > using ModMike's TEWB install freezes on [ PCI configuration end, bridges 5, devices 12 ]

    https://www.asus.com/uk/Motherboards/ROG-STRIX-Z390-I-GAMING/HelpDesk_BIOS/ Use the latest bios 2804
  12. Big-W

    Solved > [ PCI Configuration end, Bridges 4, devices 12 ] - Catalina Installation

    https://www.asus.com/uk/Motherboards/ROG-STRIX-Z390-E-GAMING/HelpDesk_Download/ Download bios file unto fat32 formatted usb stick and use asus bios flashing utility from your bios.
  13. Big-W

    Solved > [ PCI Configuration end, Bridges 4, devices 12 ] - Catalina Installation

    Try reflashing your bios and starting again maybe.
  14. Big-W

    Solved > [ PCI Configuration end, Bridges 4, devices 12 ] - Catalina Installation

    Do some research into OpenCore bootloader. It is much better than Clover IMHO, faster boot times. Have a good read through the installation tutorial. Then download the OpenCore folder from modmikes tewb build and adapt it to your set up. I've attached my old Clover folder, you can try it. I've...
  15. Big-W

    Catalina blank black screen after installation. Please help.

    Zip and post the EFI folder you are trying to boot with.
Top