Acer Aspire S7-392 "Missing bluetooth controller transport"

[Irakli]

Hey guys, I'm trying to install Yosemite with clover, but when I first boot into "install_osx" drive screen freezes at roughly 40%. Booted it with verbose and I'm getting "Missing bluetooth controller transport" message and it doesn't do anything after that.

I have Acer Aspire S7-392-9439, Intel Core i7 4500U 1.8 GHz, Intel HD Graphics 4400. Saw DrinkOJ's post in the guide thread, he/she has the same laptop as me, just a different configuration and has the same problem. What should I do?

 

[RehabMan]

Hey guys, I'm trying to install Yosemite with clover, but when I first boot into "install_osx" drive screen freezes at roughly 40%. Booted it with verbose and I'm getting "Missing bluetooth controller transport" message and it doesn't do anything after that.

I have Acer Aspire S7-392-9439, Intel Core i7 4500U 1.8 GHz, Intel HD Graphics 4400. Saw DrinkOJ's post in the guide thread, he/she has the same laptop as me, just a different configuration and has the same problem. What should I do?

You forgot to fill out your profile.

Are you using the correct config.plist for your hardware?

 

[Irakli]

I'll do that. I'm using
config_HD4600_4400_4200.plist correctly named of course, isn't it the right one?

 

[RehabMan]

I'll do that. I'm using
config_HD4600_4400_4200.plist correctly named of course, isn't it the right one?

Makes sure it is named correctly and in the correct place (EFI partition at EFI/Clover/config.plist).

Make sure you copied all kexts correctly to EFI/Clover/kexts/Other (and that you removed the version specific directories). Make sure you tried both with and without GenericUSBXHCI.kext.

If you need help, boot verbose and show a quality photo of the entire screen where it stops.

Don't forget to read the first part of the guide where it tells you how to fill out your profile correctly. At this point, you have no information on your hardware in your profile, so there is no way for me to tell if you've picked the correct config.plist.

 

[Irakli]

Makes sure it is named correctly and in the correct place (EFI partition at EFI/Clover/config.plist).

Make sure you copied all kexts correctly to EFI/Clover/kexts/Other (and that you removed the version specific directories). Make sure you tried both with and without GenericUSBXHCI.kext.

If you need help, boot verbose and show a quality photo of the entire screen where it stops.

Don't forget to read the first part of the guide where it tells you how to fill out your profile correctly. At this point, you have no information on your hardware in your profile, so there is no way for me to tell if you've picked the correct config.plist.

It is correctly named, tried with and without GenericUSBXHCI.kext still the same.


0xa260006: HD4400/HD4600/HD5000
Other Haswell ig-platform-id values: 0xa260005, 0xa260000, 0xa160000, 0xa2e0008, 0xa2e000a

Tried every ig-platform-id, still no luck, getting the same error.

 

[RehabMan]

It is correctly named, tried with and without GenericUSBXHCI.kext still the same.
View attachment 125754

0xa260006: HD4400/HD4600/HD5000
Other Haswell ig-platform-id values: 0xa260005, 0xa260000, 0xa160000, 0xa2e0008, 0xa2e000a

Tried every ig-platform-id, still no luck, getting the same error.

Post EFI folder.

Please fill out your profile.

 

[Irakli]

Post EFI folder.

Please fill out your profile.

I did it, thanks.

View attachment EFI.zip

 

[RehabMan]

I did it, thanks.

View attachment 125779

Turn off graphics injection. config.plist/Graphics/Inject/Intel=false. It will help isolate any graphics problem from other issues.

Oh... keep in mind that booting the OS X installer from USB is not quick...

 

[Irakli]

Turn off graphics injection. config.plist/Graphics/Inject/Intel=false. It will help isolate any graphics problem from other issues.

Oh... keep in mind that booting the OS X installer from USB is not quick...

Alright, thanks. I know that, and I've waited for more than one hour for the first time, but still it wouldn't continue, after changing ig-platform-ids when I saw that Bluetooth error I would turn it off almost immediately, should I wait if I see that?

 

[RehabMan]

Alright, thanks. I know that, and I've waited for more than one hour for the first time, but still it wouldn't continue, after changing ig-platform-ids when I saw that Bluetooth error I would turn it off almost immediately, should I wait if I see that?

The bluetooth log is not an indication of a problem.