Hi, i have a dell xps 15 l501x, i7-740qm, with ML 10.8.5.
I think that speedstep isn't enabled, how can i enable?
I tried to install with your steps, but still stuck on the 3rd step. When i try to perform the installation, it suddenly stops at com_lnx2mac_RealtekTRL81xx: Ethernet adress xx:xx:xx:xx:xx:xx
I only use the GraphicsEnabler=No
My dell is an i5 with nVidia 420M
Any suggestion? Thanks
i don't have NullCPUPowerManagement, i've installed hwmonitor and the temperature of all core are 80 - 86 without doing heavy work... I don't know what to do to resolve the problem
bdmesg >~/Desktop/bdmesg.txt
Thank you, i've uploaded all you have requested
I don't have any first hand experience with gen1 Core i-series... but...
Here are some suggestions and observations:
- One of the system definitions from the MacBookPro6,x family might be more appropriate for a laptop than MacPro3,1
- You should try adding DropSSDT=Yes in your org.chameleon.Boot.plist
- You have a _DSM injection for the LPC device (native 8086:3b0b), injecting 8086:3b02, yet AppleLPC is not loading. It should be loading, check that AppleLPC.kext is intact (from bdmesg output, there is no binary, just an Info.plist)
- You have an AR9280 WiFi patch in your DSDT even though you're using BCM43xx?
- Also a WiFi patch for Intel WiFi link 1000?
Thanks, i'll try, i don't know why there is an ar9280 patch but bcm43xx work, intel doesn't work but i don't care
Thanks, i'll try, i don't know why there is an ar9280 patch but bcm43xx work, intel doesn't work but i don't care