- Joined
- Jun 15, 2013
- Messages
- 46
- Motherboard
- 2013 CustoMac Budget/ GA-Z77-DS3H
- CPU
- i5 3570K
- Graphics
- Onboard
- Mac
- Classic Mac
- Mobile Phone
Please excuse (and correct) any Noob mistakes... First Hackintosh build
As described I completed the build and have attempted numerous suggestions with regard to addressing the NO audio issue. Any help would be appreciated.
BUILD
- GA-Z77-DS3H BIOS (F9), Version 1.1
- Using onboard DVI graphics
- i5 3570k
- Corsair Vengeance LP DDR3 8GB (4GBx2) 1600MHz
- CX600 600W Power Supply
- SanDisk Extreme 120GB SSD
- TP-Link TLWDN4800 Wireless PCIe
______________________________
SOFTWARE
- OSX 10.8.4
- Unibeast 1.7.0
- Multibeast 5.3.1
______________________________
METHODOLOGY
- Clean install of OSX 10.8.4 via Unibeast
- Boot OSX with -x flag
- Download and move to desktop MB
- Install UserDSDT or DSDT-Free Installation
- Reboot
- Boot is fine w/o refinements to GraphicsEnabler=NO; Display is fine except for "skippy" images noticed on Apple.com when images change, but I will post this issue in the correct forum and after this issue is defined; no audio; have not explored USB3.0 issues and aren't applicable here.
________________________________
FIXING AUDIO (Attempts)
I.
-Install MBs Driver>Audio>Realtek ALC8xx>Without DSDT>ALC887 Current
- -v GraphicsEnabler=No renders
WARNING: IOPlatformPluginUtil : getCPUIDInfo: this is an unknown CPU model 0x3a
-- power management may be incomplete or unsupported
2.543955: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
2.548013: switch Vap from 1 to 1
2.555056: ATHR unknown locale:21
2.558837: performCountryCodeOperation: Not conntected, scan in progress[0]
2.564672: setWOW_PARAMETERS:wowevents = 2(1)
2.572326: ATHR: unknown locale:21
2.576881: ATHR: unknown locale:21
2.646082: setWOW_PARAMETERS:wowevents = 2(1)
Sound Assertion in AppleHDACodecGeneric at line 360
Sound Assertion in AppleHDACodecGeneric at line 360
en1: BSSID changed to 20:76:00:6a:cc:04
en1: IO80211Interface: ostMessage bssid changed
Airport: Link Up on en1
3.627667: apple80211Request[10310] Unsupported ioctl 181
en1: BSSID changed to 20:76:00:6a:cc:04
en1: IO80211Interface: ostMessage bssid changed
AirPort: RSN handshake complete on en1
3.877375: ATHR: unknown locale:21
3.886582: ATHR: unknown locale:21
3.895710: ATHR: unknown locale:21
macx_swapon Success
FREEZE
-Reboot with only -v renders
(similar to above with different numbers (e.g., 2.463615 vs 2.543955, 2.463628 vs 2.548013, etc.) with same verbiage. 4.275805 vs 3.877375 and similar number changes, but again, with same verbiage following )
macx_swapon Success
DRMStatus: iTunes/Apple Store Content Access Problem. Content playback may be disabled on this computer. You can continue to used the machine, but you should contact an Apple support representative. ErrorCode: 8877652
FREEZE
-Reboot only possible with -x flag
II.
-Reboot with -x flag
-Install MBs Driver>Network>Atheros - Shailua's ALXth... for ethernet support (??? Only because it was in the original instructions ???)
-Reboot with -v flag
some different verbiage and #s after the Warning: IOPlatformPluginUtil..., but fewer than above. Never the less:
macx_swapon Success
DRMStatus: iTunes/Apple Store Content Access Problem. Content playback may be disabled on this computer. You can continue to used the machine, but you should contact an Apple support representative. ErrorCode: 8877652
FREEZE
- -v GraphicsEnabler=No renders
Again, same warning: IOPlatformPluinUtil...,
macx_swapon Success
FREEZE
III.
Reboot with -x flag
-add Verbost Boot and UseKernelCache=Yes via MB.
-Verbose for simplicity
-UseKernelCache=Yes as recommended in some posts
Warning still there....diff #s, similar verbiage, etc.
macx_swapon Success
DRMStatus: iTunes/Apple Store Content Access Problem. Content playback may be disabled on this computer. You can continue to used the machine, but you should contact an Apple support representative. ErrorCode: 8877652
FREEZE
IV.
Reboot with -x flag
.....
4 days of clean installs and variations of the above with no success.
No Audio ever present aside from a few pops upon boot after installing ALC887 Driver from MB. Never able to boot without -x flag or clean install (without the 887 Driver).
Any help would be greatly appreciated.
As described I completed the build and have attempted numerous suggestions with regard to addressing the NO audio issue. Any help would be appreciated.
BUILD
- GA-Z77-DS3H BIOS (F9), Version 1.1
- Using onboard DVI graphics
- i5 3570k
- Corsair Vengeance LP DDR3 8GB (4GBx2) 1600MHz
- CX600 600W Power Supply
- SanDisk Extreme 120GB SSD
- TP-Link TLWDN4800 Wireless PCIe
______________________________
SOFTWARE
- OSX 10.8.4
- Unibeast 1.7.0
- Multibeast 5.3.1
______________________________
METHODOLOGY
- Clean install of OSX 10.8.4 via Unibeast
- Boot OSX with -x flag
- Download and move to desktop MB
- Install UserDSDT or DSDT-Free Installation
- Reboot
- Boot is fine w/o refinements to GraphicsEnabler=NO; Display is fine except for "skippy" images noticed on Apple.com when images change, but I will post this issue in the correct forum and after this issue is defined; no audio; have not explored USB3.0 issues and aren't applicable here.
________________________________
FIXING AUDIO (Attempts)
I.
-Install MBs Driver>Audio>Realtek ALC8xx>Without DSDT>ALC887 Current
- -v GraphicsEnabler=No renders
WARNING: IOPlatformPluginUtil : getCPUIDInfo: this is an unknown CPU model 0x3a
-- power management may be incomplete or unsupported
2.543955: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
2.548013: switch Vap from 1 to 1
2.555056: ATHR unknown locale:21
2.558837: performCountryCodeOperation: Not conntected, scan in progress[0]
2.564672: setWOW_PARAMETERS:wowevents = 2(1)
2.572326: ATHR: unknown locale:21
2.576881: ATHR: unknown locale:21
2.646082: setWOW_PARAMETERS:wowevents = 2(1)
Sound Assertion in AppleHDACodecGeneric at line 360
Sound Assertion in AppleHDACodecGeneric at line 360
en1: BSSID changed to 20:76:00:6a:cc:04
en1: IO80211Interface: ostMessage bssid changed
Airport: Link Up on en1
3.627667: apple80211Request[10310] Unsupported ioctl 181
en1: BSSID changed to 20:76:00:6a:cc:04
en1: IO80211Interface: ostMessage bssid changed
AirPort: RSN handshake complete on en1
3.877375: ATHR: unknown locale:21
3.886582: ATHR: unknown locale:21
3.895710: ATHR: unknown locale:21
macx_swapon Success
FREEZE
-Reboot with only -v renders
(similar to above with different numbers (e.g., 2.463615 vs 2.543955, 2.463628 vs 2.548013, etc.) with same verbiage. 4.275805 vs 3.877375 and similar number changes, but again, with same verbiage following )
macx_swapon Success
DRMStatus: iTunes/Apple Store Content Access Problem. Content playback may be disabled on this computer. You can continue to used the machine, but you should contact an Apple support representative. ErrorCode: 8877652
FREEZE
-Reboot only possible with -x flag
II.
-Reboot with -x flag
-Install MBs Driver>Network>Atheros - Shailua's ALXth... for ethernet support (??? Only because it was in the original instructions ???)
-Reboot with -v flag
some different verbiage and #s after the Warning: IOPlatformPluginUtil..., but fewer than above. Never the less:
macx_swapon Success
DRMStatus: iTunes/Apple Store Content Access Problem. Content playback may be disabled on this computer. You can continue to used the machine, but you should contact an Apple support representative. ErrorCode: 8877652
FREEZE
- -v GraphicsEnabler=No renders
Again, same warning: IOPlatformPluinUtil...,
macx_swapon Success
FREEZE
III.
Reboot with -x flag
-add Verbost Boot and UseKernelCache=Yes via MB.
-Verbose for simplicity
-UseKernelCache=Yes as recommended in some posts
Warning still there....diff #s, similar verbiage, etc.
macx_swapon Success
DRMStatus: iTunes/Apple Store Content Access Problem. Content playback may be disabled on this computer. You can continue to used the machine, but you should contact an Apple support representative. ErrorCode: 8877652
FREEZE
IV.
Reboot with -x flag
.....
4 days of clean installs and variations of the above with no success.
No Audio ever present aside from a few pops upon boot after installing ALC887 Driver from MB. Never able to boot without -x flag or clean install (without the 887 Driver).
Any help would be greatly appreciated.