1. hurricaneprod

    (SOLVED) - GA-Z77-DS3H Motherboard - Catalina OS - Ethernet NOT WORKING

    Hey guys i cant make my ethernet work on my Gigabyte GA-Z77-DS3H Motherboard running OS Catalina... anyone had the same issue and made it work?
  2. charlie126

    Gigabyte GA-Z77-DS3H - rev 1.1 - Mojave Install

    Hi, Has anyone managed to successfully install Mojave on this motherboard Gigabyte GA-Z77-DS3H - rev 1.1 If so, please could you share your driver/ display setting/ system definitions? Need some help setting up the correct resolution 1920x1080 on the intel hd 4000. Currently its picking up...
  3. emresisi

    GA-Z77-DS3H Hackintosh drivers help

    Hello everyone, I have desktop for hackintosh. I installed sierra 10.12.6. some drivers i couldnt install. excluy this is my first time to set a hackintosh. so i need your help :) this is my computer; Motherboard: Gıgabyte GA-Z77-DS3H Ram: : 4X corsair 8GB 1333 MHz DDr3: 32 GB...
  4. AwesomeOne554

    MacOS black screen when waking the PC up - 10.13.5

    Specs: Gigabyte GA-Z77-DS3H 8GB DDR3 MacOS High Sierra GTX 750 Ti Hi there, Recently I've installed High Sierra on my machine with all the drivers installed, after leaving my PC for a while and it shutting off to go into sleep mode, I came back with the intention to boot it back up by pressing...
  5. danman127

    Needs help for my combo to update it with High Sierra

    I have now installed El Capitan 10.11.6 and would like to update my combo to High Sierra. Its now indicates as a Mac Pro (Early 2008) can I chance that? Please find below my combo: Antec Nine Hundred - Midi Tower – V3 - ATX case - Includes 500W PSU...
  6. wonderjimmy

    HELP! GA-Z77-DS3H Sudden Power Cut

    Hi guys, I got a hackintosh with the following configuration: - Z77 DS3H - i7 3720 - Gigabyte GeForce GT640 - 2T HDD + 120G SSD, ML is installed on the SSD and it is the boot drive - 16G RAM - El Capitan installed I have been using this machine for almost 5 years. Recently on and off it cuts...
  7. alevn

    GA-Z77-DS3H multibeast.log - Install of 'Clover_v2.3k_r3766-UEFI.pkg' failed.

    Hi folks I just decided to reinstall macOS on my computer with the newest 'Sierra'. I had Mavericks installed before and the Multibeast bootloader installation wasn't a problem as I can remember. Now I installed a fresh copy of Sierra on a new drive which worked just fine. But as I was trying...
  8. thomb91

    Kernel Panic Sierra, ALXethernet, instant reboot

    Hi Everyone After my SSD died last week I was forced to do a clean install OSX on a new drive. So far I was able to get everything working (Sound, Ethernet, Graphics card) but there is one interesting problem that remains. The clover boot loader load with out problem but when Sierra tries to...
  9. charlesstricklin

    Post El Capitan update dual monitor and some USB problems

    So, I finally got around to updating from Yosemite to El Capitan, mainly because my system started flaking out on me. I'm really impressed at how easily the system upgraded and how blazingly fast El Capitan loads compared to Yosemite, but I'm encountering a couple of problems post-install that I...
  10. eat5hams

    System will only boot after opening BIOS or booting into Recovery

    Hi, See signature for hardware. I have been trying all evening to get a working install on my Z77-DS3H. After installing and running post-install stuff (still haven't got sound working despite running audio_cloverALC110.command script), my system freezes on reboot. It freezes while on the...
  11. davidwmorrow

    ALXEthernet.kext not enabling ethernet on Clover Yosemite install on Gigabyte GA-Z77-DS3H rev 1.0

    I can't get ethernet to load using the ALXEthernet.kext on my Gigabyte GA-Z77-DS3H. I currently have it setup with Mountain Lion and used Multi-beast on the initial build which is several years old and has been working fine. I am using Clover this time. Has anybody seen a solution for this issue?
  12. Wint0nOBoogie

    Mac 10.8.2 Boots with 7970 but Generic Graphics… H E L P.

    I am Currently Running: Hardware Overview: Model Name: iMac GA-Z77-DS3H Model Identifier: iMac13,2 Processor Name: Intel Core i5 3570K Processor Speed: 3.40 GHz Memory: 16 GB Boot ROM Version: IM131.010A.B05 SMC Version (system): 2.11f14 I have gotten passed the Boot...
  13. charlesstricklin

    MultiBeast 7.4 Update forgets how to play sound

    Ever since updating using the MultiBeast 7.4 Update, I'll have sound when I first boot up or reboot, but over time it forgets how to play any sound. Simply putting the Hackintosh to sleep doesn’t seem to cause a problem. My motherboard is a GIGABYTE GA-Z77-DS3H LGA 1155 Intel Z77 HDMI SATA...
  14. kragil

    Yosemite install stops on GA-Z77-DS3H with HD3000

    I have not been able to get Yosemite installed. I set up the bios without VT-D and stuff, but when I boot with -v it stops here: I also tried -x and -f, but so far nothing helps. Anyone able to help? Total newb, sorry.
  15. micahbrubin

    Trouble Getting into bios for Gigabyte GA-Z77-DS3H & USB 3.0 Front-Panel Support

    After upgrading my hackintosh to Yosemite, I lost the front panel USB 3.0 ports on my CPU. While researching fixes to do resolve this issue, in the Gigabyte GA-Z77-DS3H bios I accidentally turned off USB 2.0 support. I've been able to use the CPU through the 2 USB 3.0 ports (and hubs). But...
  16. kbhackervgm97

    ga-z77-ds3h HD4000 issue

    So I used to have a mini ITX mobo but need more expansion room. I owned a 3rd gen i7 so based on tonymacx86 building guide I chose the ga-z77-ds3h. Intel HD4000 internal graphics used to work with mavericks on my old mobo, but after changing only the mobo to the ga-z77-ds3h I get stuck at the...
  17. jman9991

    No Drives showing up in Disk Utility on Yosemite

    Hello everyone, so recently I've upgraded to Yosemite about two months ago and for the most part it's been working fine. However now it is not showing any hard drives in Disk Utility. It doesn't even show any USB flash drives when I connect them to the computer in Disk Utility, but they do...
  18. kerorita

    No AUDIO on Yosemite 10.10.1 GA-Z77-DS3H ALC887

    Hi .. a friend of mine, told the moderator " Toleda ", could help me, so I ask for his/her expertice I have read the guide for HDA .. but sorry I'm not so wise I've been running since my hackintosh, since Tiger, without troubles but now I need help. I was a gift from my bro. I'm booting with...
  19. kerorita

    No AUDIO on Yosemite 10.10.1 GA-Z77-DS3H ALC887

    Hi .. I've been running since now my hackingtosh, but now I need help. I'm booting with Chimera 4.0.1 / I try to test Chamaleon the past work for me .. I have a GA-Z77-DS3H I7 3770 K 16 Gb CRUZIAL 1600 Overclock at 4,5 Mhz GTX 660 TI 2 Gb SSD CROSAIR M5 512 Mb 3 HD SATA 3 of 3 TB SEAGATE...
  20. charlesstricklin

    No audio w/Yosemite on a Gigabyte GA-Z77-DS3H?

    This is a dumb question, but what determines what is installed for audio? It’s the motherboard, correct? Well, I have a Gigabyte GA-Z77-DS3H LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard. When I install the ALC887/888b Current v100302 driver for Yosemite, and go through the...