Contribute
Register

MSI PRO Z690 A DDR4 + i7-12700K + AMD RX 580

gundogg9999 said:
ok thanks, here it is, I just opened the config file on my Hack EFI mount and noticed that there was blanks under the Platform Info section - is that normal. I'm pretty sure I set this to Mac Pro 7,1 earlier
Click to expand...
you have 2 bluetooth modules ?

Code: 
<dict>
                        <key>Comment</key>
                        <string>Bluetooth/Thunderbolt USB 2.0</string>
                        <key>UsbConnector</key>
                        <integer>255</integer>
                        <key>name</key>
                        <string>HS13</string>
                        <key>port</key>
                        <data>DQAAAA==</data>
                    </dict>
                    <key>HS14</key>
                    <dict>
                        <key>Comment</key>
                        <string>Bluetooth/Thunderbolt USB 2.0</string>
                        <key>UsbConnector</key>
                        <integer>255</integer>
                        <key>name</key>
                        <string>HS14</string>
                        <key>port</key>
                        <data>DgAAAA==</data>
                    </dict>

also do you have Broadcom wifi as you also have:

Code: 
<dict>
                <key>Arch</key>
                <string>Any</string>
                <key>BundlePath</key>
                <string>AirportBrcmFixup.kext/Contents/PlugIns/AirPortBrcm4360_Injector.kext</string>
                <key>Comment</key>
                <string></string>
                <key>Enabled</key>
                <true/>
                <key>ExecutablePath</key>
                <string></string>
                <key>MaxKernel</key>
                <string></string>
                <key>MinKernel</key>
                <string></string>
                <key>PlistPath</key>
                <string>Contents/Info.plist</string>
            </dict>
<dict>
                <key>Arch</key>
                <string>Any</string>
                <key>BundlePath</key>
                <string>AirportBrcmFixup.kext/Contents/PlugIns/AirPortBrcmNIC_Injector.kext</string>
                <key>Comment</key>
                <string></string>
                <key>Enabled</key>
                <true/>
                <key>ExecutablePath</key>
                <string></string>
                <key>MaxKernel</key>
                <string></string>
                <key>MinKernel</key>
                <string></string>
                <key>PlistPath</key>
                <string>Contents/Info.plist</string>
            </dict>
(also if you did have broadom, then only 1 of those would be enabled)

AirportBrcmFixup.kext is for broadcom wifi aswell



As per rules, please update your hardware profile to allow others to help you easier
 
Feartech said:
you have 2 bluetooth modules ?

Code: 
<dict>
                        <key>Comment</key>
                        <string>Bluetooth/Thunderbolt USB 2.0</string>
                        <key>UsbConnector</key>
                        <integer>255</integer>
                        <key>name</key>
                        <string>HS13</string>
                        <key>port</key>
                        <data>DQAAAA==</data>
                    </dict>
                    <key>HS14</key>
                    <dict>
                        <key>Comment</key>
                        <string>Bluetooth/Thunderbolt USB 2.0</string>
                        <key>UsbConnector</key>
                        <integer>255</integer>
                        <key>name</key>
                        <string>HS14</string>
                        <key>port</key>
                        <data>DgAAAA==</data>
                    </dict>

also do you have Broadcom wifi as you also have:

Code: 
<dict>
                <key>Arch</key>
                <string>Any</string>
                <key>BundlePath</key>
                <string>AirportBrcmFixup.kext/Contents/PlugIns/AirPortBrcm4360_Injector.kext</string>
                <key>Comment</key>
                <string></string>
                <key>Enabled</key>
                <true/>
                <key>ExecutablePath</key>
                <string></string>
                <key>MaxKernel</key>
                <string></string>
                <key>MinKernel</key>
                <string></string>
                <key>PlistPath</key>
                <string>Contents/Info.plist</string>
            </dict>
<dict>
                <key>Arch</key>
                <string>Any</string>
                <key>BundlePath</key>
                <string>AirportBrcmFixup.kext/Contents/PlugIns/AirPortBrcmNIC_Injector.kext</string>
                <key>Comment</key>
                <string></string>
                <key>Enabled</key>
                <true/>
                <key>ExecutablePath</key>
                <string></string>
                <key>MaxKernel</key>
                <string></string>
                <key>MinKernel</key>
                <string></string>
                <key>PlistPath</key>
                <string>Contents/Info.plist</string>
            </dict>
(also if you did have broadom, then only 1 of those would be enabled)

AirportBrcmFixup.kext is for broadcom wifi aswell



As per rules, please update your hardware profile to allow others to help you easier
Click to expand...

Hi, no I do not have 2 modules, I have nothing plugged in. I am trying to use onboard motherboard wifi and bluetooth of the MSI z690 wifi DDR 4
 
Hack 1
Z390 DESIGNARE |  i7 8700K |  RX 580 Pulse 8GB
gundogg9999 said:
Hi, no I do not have 2 modules, I have nothing plugged in. I am trying to use onboard motherboard wifi and bluetooth of the MSI z690 wifi DDR 4
Click to expand...
hardware profile needs to be updated before your next reply
 
I have removed the AirportBrcmFixup.kext, and wifi seems fine. I have tested all 3 kexts for Bluetooth and it seems the best I can do is when I am using all three of the below kexts for bluetooth, I can see devices and switch bluetooth on, except cannot connect to my keyboards or mouse, still, any last ideas?

I must use all 3 for bluetooth to show up>
IntelBluetoothFirmware.kext
IntelBTPatcher.kext
BlueToolFixup.kext


anyone got onboard BT to work? really prefer this to leave the PCI E slots open for my thunderbolt and extra USBs. thanks everyone for your help so far
 
Hack 1
Z390 DESIGNARE |  i7 8700K |  RX 580 Pulse 8GB
gundogg9999 said:
I have removed the AirportBrcmFixup.kext, and wifi seems fine. I have tested all 3 kexts for Bluetooth and it seems the best I can do is when I am using all three of the below kexts for bluetooth, I can see devices and switch bluetooth on, except cannot connect to my keyboards or mouse, still, any last ideas?

I must use all 3 for bluetooth to show up>
IntelBluetoothFirmware.kext
IntelBTPatcher.kext
BlueToolFixup.kext


anyone got onboard BT to work? really prefer this to leave the PCI E slots open for my thunderbolt and extra USBs. thanks everyone for your help so far
Click to expand...
my previous post mentions you have both HS13 and HS14 set as internal, only 1 of them would be set to internal.
 
Feartech said:
my previous post mentions you have both HS13 and HS14 set as internal, only 1 of them would be set to internal.
Click to expand...
Not entirely sure what you mean, sounds like HS13 and HS14 are usb stuff, actually, I have 2 usb dongles for my mouse and one for mz keyboard plugged in. is this what you mean
 
Hack 1
Z390 DESIGNARE |  i7 8700K |  RX 580 Pulse 8GB
hi all - just an update and ask for more help, i will continue this week to fix it

1. FENVI t919 - i have installed this card temporly until i get a fix for the onboard BT, and BT and WiFi are working, but the Hack is now taking way longer to load - anyone know why? the matrix screen loading up is going for ages. Also, the mouse and keyboard connect to the FENVI via BT work in mac but i can use them for the bios for example - anyone know why?

2. SLEEP
cant find a clear way to fix sleep/wake, i dont think it is working correctly, sometimes it does sometimes it doesnt. can someone point me to the right direction thanks !!
 
Last edited:
Hack 1
Z390 DESIGNARE |  i7 8700K |  RX 580 Pulse 8GB
gundogg9999 said:
hi all - just an update and ask for more help, i will continue this week to fix it

1. FENVI t919 - i have installed this card temporly until i get a fix for the onboard BT, and BT and WiFi are working, but the Hack is now taking way longer to load - anyone know why? the matrix screen loading up is going for ages. Also, the mouse and keyboard connect to the FENVI via BT work in mac but i can use them for the bios for example - anyone know why?

2. SLEEP
cant find a clear way to fix sleep/wake, i dont think it is working correctly, sometimes it does sometimes it doesnt. can someone point me to the right direction thanks !!
Click to expand...
boot verbose to see where the issue could be

make sure your usb ports are setup correctly
www.tonymacx86.com

The New Beginner's Guide to USB Port Configuration

Important Update: June 2023 From Big Sur 11.3 on the built-in OpenCore XhciPortLimit quirk no-longer worked as described. This became a known "bug", though in reality it was Apple changing their internal code, making a simple "peek and poke" to keep it operating, a difficult task. However, with...
www.tonymacx86.com www.tonymacx86.com
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top