MSI PRO Z690 A DDR4 + i7-12700K + AMD RX 580

[doc32]

Hy, everyone! I am trying to install ventura on my hack, and I used the EFI from NorthAmTransAm. The installer does not appear. I only have four items, UEFI Shell - NvramClear - Reset - can't remember the last one.
Do you have an idea?

 

[Leesureone]

Hy, everyone! I am trying to install ventura on my hack, and I used the EFI from NorthAmTransAm. The installer does not appear. I only have four items, UEFI Shell - NvramClear - Reset - can't remember the last one.
Do you have an idea?

I'm assuming you are trying to install from a USB Drive. It sounds like the Ventura installer didn't get copied to the drive correctly. Try again, and or, if that doesn't work, try a different drive.

 

[doc32]

Thanks.
Sorry, but when I try another EFI folder for test, the Installer appear.

 

[sonny362]

Hy, everyone! I am trying to install ventura on my hack, and I used the EFI from NorthAmTransAm. The installer does not appear. I only have four items, UEFI Shell - NvramClear - Reset - can't remember the last one.
Do you have an idea?

1. You're loading from flash drive with NATA's EFI or from HDD/SSD/M.2?
2. Where is Installer volume? On the flash drive?
Try to insert flash into another USB. USB 2.0 preferred.

 

[doc32]

Yes on the flash drive.
Maybe something to check or uncheck in Misc?

 

[sonny362]

Yes on the flash drive.
Maybe something to check or uncheck in Misc?

Maybe it would be helpful to check the BIOS settings:

Settings -> Advanced -> PCIe Settings -> Above 4G memory to Enabled;
Max TOLUD to Disabled;
Re-Size BAR Support to Disabled;
- Settings -> Advanced -> Integrated Peripherals - VGA Detection to Auto;
- Settings -> Advanced -> Integrated Graphic Configuration -> Initiate Graphic Adapter to PEG;
IGD Multi-Monitor to Disabled;
- Security -> Secure Boot to Disabled;
- OC Settings -> CPU Features -> CFG Lock to Disabled.

 

[doc32]

Nothing change.

My cpu is a KF version so i don't have this:
- Settings -> Advanced -> Integrated Graphic Configuration -> Initiate Graphic Adapter to PEG;
IGD Multi-Monitor to Disabled;

 

[sonny362]

Nothing change.

My cpu is a KF version so i don't have this:
- Settings -> Advanced -> Integrated Graphic Configuration -> Initiate Graphic Adapter to PEG;
IGD Multi-Monitor to Disabled;

Try to Clear NVRAM and reboot.

 

[doc32]

Everything is fine.
I used another EFI folder for a fresh installation and then put the NorthAmTransAm's.
I don't understand why the installer don't appear with his. I tried many things but nothing change.
Now it's working and it's the most important.

 

[CREEEP]

hi @NorthAmTransAm
My parts arrived

cpu:12700k
mb:msi z690 a pro wifi ddr4
ssd:wd black 850
gpu:5700xt

can i have your EFI please?