CaseySJ
Moderator
- Joined
- Nov 11, 2018
- Messages
- 22,225
- Motherboard
- Asus ProArt Z690-Creator
- CPU
- i7-12700K
- Graphics
- RX 6800 XT
- Mac
- Classic Mac
- Mobile Phone
** OpenCore 0.7.8 EFI for Z390 Designare **
Supports Mojave, Catalina, Big Sur, and Monterey
Please do not quote this post in its entirely. Use a link instead.
Also available from HackinDROM App
** NOTE **
Mojave and Catalina Users: Please see "Post-Update Procedure" below.
Please use OpenCore Configurator 2.56.0.0 or next version and ensure that it's set to
0.7.8 Development Configuration or 0.7.8 Release Configuration
When using OpenCore Configurator, ensure that only one EFI partition is mounted
Supports Mojave, Catalina, Big Sur, and Monterey
Please do not quote this post in its entirely. Use a link instead.
Also available from HackinDROM App
** NOTE **
Mojave and Catalina Users: Please see "Post-Update Procedure" below.
Please use OpenCore Configurator 2.56.0.0 or next version and ensure that it's set to
0.7.8 Development Configuration or 0.7.8 Release Configuration
When using OpenCore Configurator, ensure that only one EFI partition is mounted
Windows Users:
If you are unable to boot Windows through OpenCore, try disabling AppleVTD by following the bottom half of this post.
Monterey -- What Does Not Work:
- Intel I-211 Ethernet port driven by SmallTreeIntel82576 is not working at this time. The other Ethernet port (I-219) is fully operational. If a second Ethernet port is needed, options include:
- USB to Gigabit Ethernet adapter
- USB to 2.5GbE Ethernet adapter
- USB-C dock with built-in Ethernet port
- Thunderbolt dock with built-in Ethernet port
- Apple Thunderbolt to Gigabit Ethernet adapter (requires AppleVTD to be enabled)
- Laird BT851 Bluetooth 5.0 USB dongle not working at this time.
- If Monterey is installed on Samsung NVMe SSDs, boot time can increase by 60-100 seconds due to "trim" incompatibilty.
- This can be addressed by cloning the Samsung NVMe SSD to another disk, erasing the Samsung NVMe SSD with Disk Utility, and cloning macOS back. Please be careful with this process if you decide to do it.
- Crucial P2 NVMe SSDs (only P2 series) also suffer from trim issues in Monterey.
This Update Includes:
- OpenCore 0.7.8
- AppleALC 1.6.9
- Lilu 1.6.0
- WhateverGreen 1.5.7
- RestrictEvents 1.0.7
- OpenIntelWireless ZIP:
- IntelBluetoothFirmware 2.1.0
- IntelBluetoothInjector 2.1.0 (not used in Monterey)
- AirportItlwm 2.1.0 for Mojave, Catalina, Big Sur, Monterey
Instructions:
- Download appropriate ZIP file below and follow these instructions to configure config.plist.
- If "Resizable BAR Support" is enabled in BIOS, set
ResizableAppleGpuBars
to 0 in Booter quirks. - Copy EFI folder to EFI partition of USB flash disk and boot from USB flash disk.
- Ensure that REL-078-xxx appears on bottom right corner of OpenCanopy Picker.
- If everything is okay, mount the EFI partition of USB flash disk and internal macOS SSD, then copy EFI folder from USB flash disk to internal macOS SSD.
Catalina and Mojave Users:
- Set SecureBootModel to Disabled.
Issues:
Which File to Download:
- Broadcom WiFi/BT (such as Fenvi FV-T919) --> OC-078-DESIGNARE-Z390.zip
- Intel WiFi/BT --> OC-078-DESIGNARE-Z390-INTEL-WIRELESS.zip
- Radeon VII and Vega 56/64 users must disable or remove boot argument agdpmod=pikera.
Updates:
- None yet
Attachments
Last edited: