Z690 Chipset Motherboards and Alder Lake CPU

[joshuame149]

Hi does anyone know how what the problem is with my boot screen? I was Tinkering and Couldn't figure out, This is For a Asus Prime P D4 Z690, i9-12900K running macOS Monterey. I had it working a few days ago. I've provided my config playlist. I'm sure its something simple I'm overlooking.

 

[AirArt]

No problem, here you go.

Any particular BIOS settings I need to be care of?

 

[Middleman]

Hi does anyone know how what the problem is with my boot screen? I was Tinkering and Couldn't figure out, This is For a Asus Prime P D4 Z690, i9-12900K running macOS Monterey. I had it working a few days ago. I've provided my config playlist. I'm sure its something simple I'm overlooking.

You could try using the ocvalidate tool with your working OC version and see if it helps. Other than that I'd suggest reverting to the previous working build and go from there. As a rule of thumb I always make backup copies of my EFI before editing (in case of screw-ups).

 

[energy23]

i5 12400F:

View attachment 538992


View attachment 538993

Woud you be willing to run a Cinebench r23 run or a simple Handbrake compression:

Z690 Chipset Motherboards and Alder Lake CPU

Same computer 32 Gb RAM more: Your preset was set to 'Fast' (thus the faster encode)

www.tonymacx86.com

Thank you!!

 

[helmutschneider]

Any particular BIOS settings I need to be care of?

Disable the e-cores and you should be good to go.

 

[Arivelo]

The b660 Motherboard will work for a build?

 

[dclive]

The b660 Motherboard will work for a build?

We've got a report of success, but no EFI or Golden Build yet.

 

[joshuame149]

You could try using the ocvalidate tool with your working OC version and see if it helps. Other than that I'd suggest reverting to the previous working build and go from there. As a rule of thumb I always make backup copies of my EFI before editing (in case of screw-ups).

yea i messed up i had it working but messed it up trying to set up the SATA hotplugs, still currently it wont boot i must have disabled or enabled something in opencore configurator. is there anything i can upload to figure out how to get it to boot again, also i want to make sure the SATA ports work so i can connect hard drives and ssds. if i do get it to work ill make sure to save a EFI File Somewhere maybe ill upload the EFI here. this is the OC Validator screen it says 11 errors

 

[energy23]

Does anyone know if the non-k variants like the 12400 and recently announced 12600 that don't have e-cores make setup of OpenCore any easier? Is the setup more or less like z590 and Rocket Lake CPUs?

 

[StefanAM]

This test is quite challenging..... I had to put PL2 to 190 W and make other undervolt changing, if not, HandBrake crash. Like you see the E cores are working (I use CpuTopologyRebuild.kext). If you fix your computer to run this, you are ready for any stress test . Now I'll do others benchmark to see how much I lose in performance keeping this settings.

Same computer 32 Gb RAM more: