- Joined
- Feb 18, 2020
- Messages
- 19
- Motherboard
- ASUS ProArt Creator 10G
- CPU
- i5-10400
- Graphics
- UHD 630
- Mac
- Mobile Phone
Yes I am currently running the IGPU so that was the main workaround I had to get up first to install. For the onboard Ethernet I had to use the FakePciii kexts, and it is running fine. My Thunderbolt wasn’t seeing my Apollo at all until I found a driver from a Z390 build that had a similar address, it came up with it, but I did modify if from rp05 to rp21 as hackintool saw it. Seems to connect quicker now. Hot swap not up yet but now hackintool isn’t the only thing seeing it, and it is functional now.I tried with your Plist file last night, it works if I use iGPU as the output. The Fenvi wireless adapter works OOB. The 10GBE also works OOB with no extra Kext injected, this is the great news. But my NAS only has 400MB w/r max speed, so I cannot say if 10GBE is running at the max bandwidth or not, but it does reach the max speed my NAS could get. The downsides are 1) I cannot make dGPU (RX 5700XT) working; 2) cannot wake up from sleep; 3) CPU power strategy seems not right, I got 6100 with Cinebench r20 at the first round, and 5600 at the second round, and then keep at 4600. I used Intel Power Gadget to see the power consumption, it only maintains fewer 20s with 5.0GHz all core and package wattage of 200W, and then it always runs at 130W with about 4.3 GHz all cores. And the temperature is around 68 C. 4) onboard ethernet doesn't work, but it is not an issue for me, I connect my ethernet to my TB3 dock.
I know these issues can be fixed with proper kext injections, I am gonna work on those after I get dGPU running. I haven't checked TB3, and will do that as well after dGPU is fixed.
I haven’t had a chance to even look at the CPU power strategy yet or benchmark, Thunderbolt was my main focus, because I am looking to switch my recording studio over to Mac for the purpose of giving Logic an honest try.