[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[ziggenpuss]

Yeah, I don't think we should need to though, with Macbook users experiencing the same thing, and other people with the same build as us (same mapping too), suggests maybe it's some of the peripherals we're using are drawing a certain amount of power that is causing it to crash. Other peoples might draw a different amount, so there's no problem. Might not be the cause at all, but maybe in trying to squeeze a little more juice out of the battery, Apple have broken compatibility. If these adaptors work, which isn't totally proven yet, get the impression a software fix won't be far off.

Talking about power I have the Softube Console 1 & Fader - both just eat power and are completely erratic in certain USB setups eg. a USB2 powered Hub coupled with other peripherals is a no go. They need their own port to behave properly.

 

[boob]

Talking about power I have the Softube Console 1 & Fader - both just eat power and are completely erratic in certain USB setups eg. a USB2 powered Hub coupled with other peripherals is a no go. They need their own port to behave properly.

Yep, it would make sense wouldn't it. When I had my Prism Titan which is USB2 going into the USB 3, which is also feeding the connection of my modular through it's adat, so lot of power going on, that's when I was getting freezes every 10 mins. Soon as I put that and the iLok into the top two ports it stopped freezing. Interestingly other power hungry things, Komplete Kontrol etc don't seem to be causing any problem. Maybe their grounds are bridged, or they just draw the right amount of power? Imagine by tomorrow someone will say that they're getting freezes even with these adaptors though so I'll have to crawl back into my hole.

 

[bmoney]

Hi @ziggenpuss and @boob,

Do you have all devices hooked up to a USB3 PCI card and nothing on the MB USB ports?

 

[boob]

I've got everything going straight into the motherboard, haven't got the card yet. If there's no software fix soon it seems as though the card is the way to go though, to get the stability.

 

[Wobbledon]

Hi

Below are the screen shots as requested. The SmallTree Kext isn't in Clover and my RP02 looks differently.
Am I right in thinking the kext hasn't installed?
Thanks again for all the help, really appreciate it

The /L/E folder looks fine. Some questions/requests:

• Please post a screenshot of CLOVER/kexts/Other
• And a screenshot of Clover Configurator --> System Parameters page
• Run IORegistryExplorer and scroll the device tree on left side until you see RP02 (do not use the 'search' bar)
  • Do you see something like this?
  • If not, please post a screenshot.

View attachment 479481

 

[bmoney]

I've got everything going straight into the motherboard, haven't got the card yet. If there's no software fix soon it seems as though the card is the way to go though, to get the stability.

Hopefully..... So far so good. Seem like its been working well for @jleahy2. Lets see if we can get a few collective weeks of no freezes and then it would seem there i's viable fix/workaround.

 

[zkejonathan]

@CaseySJ Hi mate, thank you for your patience again. Here is my final solution for other users who also have a Corsair Commander Pro.

1. Please stay with bootloader Clover 5.0 v5118, otherwise, the Bluetooth may stop working occasionally.
2. For those who want to fresh install Catalina 10.15.5, you must disconnect your Commander Pro temporally.
3. Follow this link to fix UPS problems. All credits go to @CaseySJ and @jb007

 

[ziggenpuss]

@boob @bmoney

Motherboard USB2 (Ports 9).
LINDY USB2 7-port Hub with:
Softube Console 1 & Fader

Motherboard USB2 (Ports 10).
LINDY USB2 7-port Hub with:
Roland TR-8S, Push 2, Komplete 49, Minilogue XD, E-RM Multiclock, iLok
Apple Keyboard plugged in wired charge - connection via bluetooth
Logitech Mouse plugged in wired charge - connection via wireless Logitech Dongle
(using wireless as bluetooth won't work with this mouse?? However bluetooth is fine with iPhone anything else etc.)

Internal USB for bluetooth

Motherboard USB3 (Port 7)
Elektron USB3 Overhub 7-port hub:
2 x Lacie 8TB USB3 Drives + any other USB3 that may get plugged in/out usb sticks etc

 

[evlthoma]

As usual, every couple of weeks or so, I lost USB connections, after rebooting gets fixed, fortunately my main audio interface it's FW and solid as a rock in Mojave , it's good to know that the inatek card works, sooner or later probably I'll take it away from the vintage MacPro where it lives to give it a spin

I got 13 days between lockups. I lost Magic Mouse/Keyboard and couldn't login. I did get back into the hackinstosh via Chrome Remote Desktop and the USB 2.0 and Bluetooth are just missing (I'll try and do a better documenting next time). They came back after a reboot.

 

[Inqnuam]

HackinDROM​

Here is it!
This One-click tool provides you Thunderbolt SSDT with Unique Identifier.
You can change Vendor and Device name.

Supported Motherboards and PCIe cards:

-Gigabyte Designare Z390
-Gigabyte GC-Titan Ridge
-Gigabyte GC-Alpine Ridge
-Gigabyte Z390 AORUS Xtreme
-Gigabyte Z490 Vision D
-Asus ThunderboltEX 3
-ASRock Z390/Z370 ITX/ac

If needed more options can be added in the future. (@CaseySJ waiting for yours suggestions)
Enjoy!

Please test and give me your feedback for:
Gigabyte Designare Z390 Confirmed
Gigabyte GC-Titan Ridge Confirmed
Gigabyte GC-Alpine Ridge Confirmed
Gigabyte Z390 AORUS Xtreme Confirmed
Gigabyte Z490 Vision D Confirmed
Asus ThunderboltEX 3 Confirmed
ASRock Z390/Z370 ITX/ac Confirmed