trs96
Moderator
- Joined
- Jul 30, 2012
- Messages
- 25,553
- Motherboard
- Gigabyte B460M Aorus Pro
- CPU
- i5-10500
- Graphics
- RX 570
- Mac
- Mobile Phone
Try enabling legacy support in BIOS and see what happens.
[Guide] HP Elite 8300 & 6300 Pro (all form factors) using Clover UEFI hotpatch
- Joined
- Mar 16, 2015
- Messages
- 495
- Motherboard
- HP 6300 SFF-V3.08
- CPU
- i5-3570
- Graphics
- GT 640
- Mac
- Classic Mac
Instead of your own ssdt.aml, put the i5-3470 ssdt.aml attached in the guide below into /EFI/CLOVER/ACPI/patched and see if the RX570 shows it.
add:
config.plist -> Kernel and Kext Patches -> KernelXCPM = true (check)
Updated for 2020 - High Sierra on the HP 8300 Elite / 6300 Pro Desktop PC
Install High Sierra on the HP 8300 Elite Video Guide It's been over two years since the original video guide was published. Many things have changed in the way we install and configure macOS on these HP desktops. Unibeast has also been updated to 8.4.0 for High Sierra. It now uses a more recent...
www.tonymacx86.com
Last edited:
- Joined
- Dec 7, 2019
- Messages
- 10
- Motherboard
- hp
- CPU
- i5 3470
- Graphics
- rx 570
Instead of your own ssdt.aml, put the i5-3470 ssdt.aml attached in the guide below into /EFI/CLOVER/ACPI/patched and see if the RX570 shows it.
add:
config.plist -> Kernel and Kext Patches -> KernelXCPM = true (check)
Updated for 2020 - High Sierra on the HP 8300 Elite / 6300 Pro Desktop PC
Install High Sierra on the HP 8300 Elite Video Guide It's been over two years since the original video guide was published. Many things have changed in the way we install and configure macOS on these HP desktops. Unibeast has also been updated to 8.4.0 for High Sierra. It now uses a more recent...
In the patched folder, do I also remove SSDT-EC from previously too?
- Joined
- Mar 16, 2015
- Messages
- 495
- Motherboard
- HP 6300 SFF-V3.08
- CPU
- i5-3570
- Graphics
- GT 640
- Mac
- Classic Mac
No, Cataina seems to need SSDT-EC.aml.
- Joined
- Dec 7, 2019
- Messages
- 10
- Motherboard
- hp
- CPU
- i5 3470
- Graphics
- rx 570
Okay. I’ll with both then
- Joined
- Dec 7, 2019
- Messages
- 10
- Motherboard
- hp
- CPU
- i5 3470
- Graphics
- rx 570
Now it’s seems to be really snow, and never reaches the end..
Edit: yeah it’s just stuck in the end. Didn’t finish
Last edited:
- Joined
- Mar 16, 2015
- Messages
- 495
- Motherboard
- HP 6300 SFF-V3.08
- CPU
- i5-3570
- Graphics
- GT 640
- Mac
- Classic Mac
I have an HP8300CMT i5-3470 RX570 and it worked fine with SMBIOS=Macmini6.1 (currently SMBIOS=iMacPro1.1).
Is the following story helpful?
[Guide] HP Elite 8300 & 6300 Pro (all form factors) using Clover UEFI hotpatch
I really don't care if I have to disable IGP (I tried with that too). Some change the SMBIOS to iMac 13,2 instead of 6,1 Mac mini and then the AMD cards work. Give that a try. You can simply change it at the Clover Boot menu to test it.
www.tonymacx86.com
- Joined
- Dec 7, 2019
- Messages
- 10
- Motherboard
- hp
- CPU
- i5 3470
- Graphics
- rx 570
not really.. but I was able to get screen to show up randomly again. I tried using the configplist from the following story. Not sure whats different between that one and the one I got form this thread though. Anyways, there was more frequent green flashes this time though. However, but screen would still be black.. I think I pressed the power button, and reconnected my hdmi, and after I clciekd the power button the second time. My login screen showed up...
- Joined
- Dec 7, 2019
- Messages
- 10
- Motherboard
- hp
- CPU
- i5 3470
- Graphics
- rx 570
Edit: I replicated it again... If I manage to put the computer to sleep (perhaps form being idle), And reawaken it , the gpu will respin and the display will show up.
Any clue on what is going on?
Edit2: doesnt look like there is anyway for me to put it into sleep other than being idle for a while, and the reawaken it.
Last edited:
- Joined
- Mar 16, 2015
- Messages
- 495
- Motherboard
- HP 6300 SFF-V3.08
- CPU
- i5-3570
- Graphics
- GT 640
- Mac
- Classic Mac
I think it is the specifications of RX570.
The fan will rotate when the power is turned on or when the temperature exceeds 60 degrees.
Applemenu->sleep
As for what I was trying to do, I was trying to follow the guide below with SMBIOS=Macmini6.1.
macOS Native Discrete GPU Power Management
macOS (nearly) Native Discrete GPU Power Management Native macOS discrete graphics power management delivers the best combination of graphics performance and efficiency. AppleGraphicsPowerManagement.kext is not natively supported on non native hardware (except, iMacPro1,1/Vega). A graphics card...
www.tonymacx86.com