[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[aviadzam]

Are you using the Gigabyte Designare Z390 or the Gigabyte GA-Z270X-UD5?

• In your CLOVER/ACPI/patched folder you have copied the 4 SSDTs for Designare Z390, including the USB SSDT (filename: SSDT-UIAC-DESIGNARE-Z390-V5.aml). This file is only valid for the Designare Z390 motherboard. If you're using the GA-Z270X-UD5, you must delete this file. In fact, you should delete all 4 of the SSDTs in that directory.
• Attached is a modified config.plist that includes the 3rd USB port limit patch from the link in my previous email. I don't know whether these patches will work with 10.14.4, but it's worth a try.
• In your CLOVER/kexts/Other folder, please delete these 2 files:
  • Lilu.kext.dSYM
  • WhateverGreen.kext.dSYM

first of all thank you for your time and help , i tried this but still USB3.0 not working in the from and in the back
USB2.0 and USB C3.1 working perfect

 

[CaseySJ]

first of all thank you for your time and help , i tried this but still USB3.0 not working in the from and in the back
USB2.0 and USB C3.1 working perfect

This is exactly why we always ask users to create custom USB SSDTs for their motherboards! Every time Apple updates the OS, it is very likely that the USB port limit patch will stop working. This is why there are different USB patches for 10.14.0, 10.14.1, 10.14.2, etc. So you have 2 options:

• Create a custom SSDT for your motherboard by following this guide.
• Wait until a 10.14.4 USB port limit patch comes out.

 

[rodjar]

Hello, this is a bit off of the build here, but this seems to be the best post to make this in before I start my own.

Working with an Nvidia 1080ti and the z390 designare on 10.13.4 and can't get the nvram to enable even with emuVariable installed. Any ideas would be great. I'm using the ACPI patches listed in the guide with the exception of the RX580 one and OsxAptioFix2Drv-free2000.efi

Trying to avoid buying an RX580 to get this working.

 

[P1LGRIM]

can't get the nvram to enable even with emuVariable installed.

Install the RC scripts too.

 

[aviadzam]

This is exactly why we always ask users to create custom USB SSDTs for their motherboards! Every time Apple updates the OS, it is very likely that the USB port limit patch will stop working. This is why there are different USB patches for 10.14.0, 10.14.1, 10.14.2, etc. So you have 2 options:

• Create a custom SSDT for your motherboard by following this guide.
• Wait until a 10.14.4 USB port limit patch comes out.

the first option is to hard for me , i think ill wait for the new patch
if you get any update please let me know

 

[Feartech]

the first option is to hard for me , i think ill wait for the new patch
if you get any update please let me know

you could also try the hackintool:

[Release] Hackintool v3.x.x

HACKINTOOL The Swiss army knife of vanilla Hackintoshing WARNING! Hackintool is not an automated patching tool that does all the work for you. Knowledge is required on how to patch before using it. Please read the Intel Framebuffer patching using WhateverGreen guide before you download this...

www.tonymacx86.com

 

[rodjar]

Install the RC scripts too.

Thanks for the fast reply! Is there a guide for uninstalling the entire clover install and installing with RC scripts? This would be the option with emulated NVRAM right?

 

[P1LGRIM]

Thanks for the fast reply! Is there a guide for uninstalling the entire clover install and installing with RC scripts? This would be the option with emulated NVRAM right?

Just run the Clover installer and select RC scripts.

 

[CaseySJ]

Thanks for the fast reply! Is there a guide for uninstalling the entire clover install and installing with RC scripts? This would be the option with emulated NVRAM right?

Just run the Clover installer and select RC scripts.

Follow the first 3 screenshots here:

[Solved] Mojave 10.14.1 shutdown problem (h370)

no changes ( I'm already checked dsdt for errors and try to remove all _PRW in dsdt methods but nothing changes. It's weird but few times PC was shutdown properly. If you have already changed the BIOS and still have the problem, try placing [√] HaltEnabler in config.plist_ACPI [See uploaded...

www.tonymacx86.com

 

[Anim8me2]

Ignore previous post. Fixed