- Joined
- Oct 19, 2015
- Messages
- 140
- Motherboard
- ASUS Sage WS II x299
- CPU
- i9-7980XE
- Graphics
- AMD Radeon 6900XT
- Mac
- Mobile Phone
Anyone?
Can you upload your efi folder?
Anyone?
Sure! I really can't access clover configurator. Thanks a lot!Can you upload your efi folder?
@kgp
I need some advice :
I 'm about to upgrade my Prime x299 Deluxe build with two 970 EVO NVMe M.2 :
In which M.2 Socket do you recommend installing MacOs in M.2_1 and Windows in M.2_2 installation ?
Do you mind giving us some temp/speed with the alphacool adapter?You know that my answers rarely are those expected and if you give me too option I will tell you likely some third solution ..
I had big troubles with EVO 960s in the M.2 slots of the Prime x299 Deluxe. I don't know if it was the fault of the EVO 960s or thermal throttling induced by standard heatsinks in use.
Therefore the optimal solution I can recommend and use myself under macOS is a 970 Pro inside a alphacool eisblock HDX3 PCIe x4 adaptor. Absolutely flawless and fantastic performance
View attachment 383901
The M.2 for windows is less critical and can be used in any of the two M.2 slots of the Prime x299 Deluxe. If you don't have any separate M.2 heatsink, you might want to use the M.2 slot with the onboard heatsink for the latter.
Hope this helps somehow..
Sure! I really can't access clover configurator. Thanks a lot!
Do you mind giving us some temp/speed with the alphacool adapter?
@Loloflatsix with aluminum heatsinks from amazon here are my specs.
https://www.amazon.com/gp/product/B078X8XYJS/?tag=tonymacx86com-20
@kgp I've made the USB kext for Asus Prime X299 Deluxe II, below is the mapping of the USB ports. Hope it can be the proper USB kext for users of this board.
HS01 (3) HS02 (3) SSP1 (3) SSP2 (3) ----- Internal USB 3.0 header (U31G1_12) (I connected them to front panel USB 3.0 ports)
HS03 (3) HS04 (3) SSP3 (3) SSP4 (3) ----- Internal USB 3.0 header (U31G1_34)
HS05 (3) SSP5 (3) ----- The USB 3.0 Port above the right Thunderbolt 3 port
HS06 (255) SSP6 (255) ----- ASMedia USB 3.1 Gen1 Hub (The USB 3.0 port above the left Thunderbolt 3 port+two USB 3.0 ports below the Aquantia Internet port)
HS07 (0) HS08 (0) ----- Internal USB 2.0 header (USB78), if the header connects to additional wifi+bluetooth card, then HS08 should be (255)
HS09 (0) HS10 (0) ----- Didn't show any information after plugging USB to every port in the IOregistory
HS11 (0) ----- The USB 2.0 port on the top on the back panel
HS12 (0) ----- The USB 2.0 port below on the back panel
HS13 (255) ----- onboard bluetooth device
HS14 (255) ----- onboard ASUS AURA
In the truncated 15 port USB kext,
HS09 and HS10 are deleted because they are not working at all.
HS13 is deleted because the onboard wifi does not work in macOS.
HS04 and HS07 are deleted because they generally do not work unless one connects the header to additional USB extender. (HS03 and HS08 also can be deleted, I am just randomly deleting unused ports to make 15 ports in total.)
Any advice for me to improve the kexts?
@kgp I've made the USB kext for Asus Prime X299 Deluxe II, below is the mapping of the USB ports. Hope it can be the proper USB kext for users of this board.
HS01 (3) HS02 (3) SSP1 (3) SSP2 (3) ----- Internal USB 3.0 header (U31G1_12) (I connected them to front panel USB 3.0 ports)
HS03 (3) HS04 (3) SSP3 (3) SSP4 (3) ----- Internal USB 3.0 header (U31G1_34)
HS05 (3) SSP5 (3) ----- The USB 3.0 Port above the right Thunderbolt 3 port
HS06 (255) SSP6 (255) ----- ASMedia USB 3.1 Gen1 Hub (The USB 3.0 port above the left Thunderbolt 3 port+two USB 3.0 ports below the Aquantia Internet port)
HS07 (0) HS08 (0) ----- Internal USB 2.0 header (USB78), if the header connects to additional wifi+bluetooth card, then HS08 should be (255)
HS09 (0) HS10 (0) ----- Didn't show any information after plugging USB to every port in the IOregistory
HS11 (0) ----- The USB 2.0 port on the top on the back panel
HS12 (0) ----- The USB 2.0 port below on the back panel
HS13 (255) ----- onboard bluetooth device
HS14 (255) ----- onboard ASUS AURA
In the truncated 15 port USB kext,
HS09 and HS10 are deleted because they are not working at all.
HS13 is deleted because the onboard wifi does not work in macOS.
HS04 and HS07 are deleted because they generally do not work unless one connects the header to additional USB extender. (HS03 and HS08 also can be deleted, I am just randomly deleting unused ports to make 15 ports in total.)
Any advice for me to improve the kexts?