- Joined
- Mar 31, 2016
- Messages
- 117
- Motherboard
- Gigabyte GA-Z97X-UD3H-BK
- CPU
- i5-4690K
- Graphics
- RX 580
- Mac
I also use the XHCI-300-series-injector.kext and AHCI-300-Series.kext.
Where can I find AHCI-300-Series.kext?
I also use the XHCI-300-series-injector.kext and AHCI-300-Series.kext.
Where can I find AHCI-300-Series.kext?
Struggling with HDMI using UHD 630, Mojave.
I've done quite a few hackintosh builds now and never had major issues like this before. Have always managed to get things to work via Multibeast. I have no experience using clover configurator or editing plists etc. Any help appreciated.
H370m d3h rev 1 (latest bios)
Intel i3-8350k
UHD 630
Mojave 10.14.1
Bios settings as per guide and "DVMT pre" set to 128, "DVMT total" set to MAX
HDMI worked fine at first run but post multibeast it broke. It now cuts out shortly before login screen. VGA works fine so I can easily get in and tinker. Have tried various system defs. Multibeast settings as per attached.
Many thanks in advance. Sorry if I have forgotten anything.
Since this is the best thread on the H370M ds3h, I have some basic questions (because I like to solve my problems one by one;-)
I really cannot find these items in the bios (F1):
Do they exist or not? Should I update bios?
- If your system has CFG-Lock, disable it
- If your system has Secure Boot Mode, disable it
Now I'm struggling with which options to check in MultiBeast USB configuration. My High Sierra always reboot everytime I leave it sleeping for long period of time, I suspect some of these options may be causing it.
Well, I'm not shure about that. But I think the drivers you installed are not needed for this mb. Certainly the second one is wrong. This is what I installed (see picture), and works fine.