Contribute
Register

Success with Gigabyte H370M DS3H +i5-8400 coffee lake

Joined
Dec 27, 2016
Messages
8
Motherboard
Gigabyte H370M-DS3H
CPU
i5-8400
Graphics
GTX 1050 Ti
Well, I'm not shure about that. But I think the drivers you installed are not needed for this mb. Certainly the second one is wrong. This is what I installed (see picture), and works fine.
Thank you, kind sir. May I see the rest of your configuration in your build tab? I have changed my USB configuration accordingly. Sadly, that restart to reboot thing is still happening.

Here's mine.
 

Attachments

Last edited:
Joined
Aug 29, 2014
Messages
9
CPU
i7
Graphics
GTX 980
please help me I finally managed to solve the problem on gigabyte H310M S2P CPU I5 8400 RAM 8gb DDR4 2400 sata wd hard disk 500gb on board vga intel UHD graphics 630 when i install mac sierra 10.12.3 but is install so slowly for 2 hours i'm waiting on this please help me
 

Attachments

Joined
Jul 31, 2015
Messages
50
Motherboard
H370M-DS3H
CPU
I3-8350K
Graphics
UHD 630
please help me I finally managed to solve the problem on gigabyte H310M S2P CPU I5 8400 RAM 8gb DDR4 2400 sata wd hard disk 500gb on board vga intel UHD graphics 630 when i install mac sierra 10.12.3 but is install so slowly for 2 hours i'm waiting on this please help me
Had that problem also at any point in time. Most probably something wrong in bios settings..
 
Joined
Jul 31, 2015
Messages
50
Motherboard
H370M-DS3H
CPU
I3-8350K
Graphics
UHD 630
This is a screenshot I made from this forum sometime. This is very close to all the bios settings for my mb. Only the ioapic chipset (third from below) I don't have.
You also have to set internal serial port to disabled.

Also: try several usb slots, 2.0, 3,0 etc. They might behave different.
Also the uefi settings are important!
 

Attachments

Last edited:
Joined
Jul 31, 2015
Messages
50
Motherboard
H370M-DS3H
CPU
I3-8350K
Graphics
UHD 630
Thank you, kind sir. May I see the rest of your configuration in your build tab? I have changed my USB configuration accordingly. Sadly, that restart to reboot thing is still happening.
OK, this is mine. My configuration is only different with the graphical setup (I use internal CPU graphic). So you have to sort that out yourself.
I also notice that Your ssd or harddisk has a different name. Tonymac advices to call it "Mojave" and then later (post installation) you can rename it.
 

Attachments

Joined
Aug 29, 2014
Messages
9
CPU
i7
Graphics
GTX 980
i have audio card gina 3g its work under Windows i have drivers for mac but when i install the drivers and finish the install is ask me to restart i do restart but no sound work can any one halp me please thank you brothers for your help
 

Attachments

Last edited:
Joined
Jan 26, 2019
Messages
4
Motherboard
Gigabyte H370M DS3H
CPU
i5-8400
Graphics
UHD 630
Today i bought a H370M DS3H and i5-8400.
I created a config using Clover (I also tried the supplied one by @backwardmac), however my system does not enter the macOS installer.
After some time the log reports "matches prelinked kext but can't determine if executables are the same", then "Service exited with abnormal code:1", prints some additional information and then the screen goes dark (turns off). What can I do?
IMG_0032.jpg
 
Top