<< Solved >> Help with intel UHD 630 graphics

[CaseySJ]

Attempt 3: (Boot with USB disk)
Row 1: BusID 0x06, Type DP
Row 2: BusID 0x04, Type HDMI
Row 3: BusID 0x05, Type DVI

This is our last experiment. If this also fails, then I would suggest using HDMI for testing the ports. If you have a flat screen television, you can connect your computer to that with HDMI and try again with config-v1.plist and config-v2.plist!

 

[RowenDJ]

Attempt 3: (Boot with USB disk)
Row 1: BusID 0x06, Type DP
Row 2: BusID 0x04, Type HDMI
Row 3: BusID 0x05, Type DVI

This is our last experiment. If this also fails, then I would suggest using HDMI for testing the ports. If you have a flat screen television, you can connect your computer to that with HDMI and try again with config-v1.plist and config-v2.plist!

thanks for your help but that didn't work. I don't know what is happening

 

[CaseySJ]

thanks for your help but that didn't work. I don't know what is happening

Please keep an eye on the following thread. We're trying to see if BusIDs 0x01 and 0x02 might solve some of these problems.

https://www.tonymacx86.com/threads/...dmi-black-screen-problem.269149/#post-1888265

 

[CaseySJ]

@RowenDJ Based on the possibility that BusID 0x01 may be effective for HDMI, I've created two new config.plists to try and enable both HDMI and DVI. There's a higher chance that HDMI will be enabled. So if you like, feel free to try them.

 

[RowenDJ]

@RowenDJ Based on the possibility that BusID 0x01 may be effective for HDMI, I've created two new config.plists to try and enable both HDMI and DVI. There's a higher chance that HDMI will be enabled. So if you like, feel free to try them.

No luck with HDMI, the same with DVI.. maybe if I buy Sapphire Pulse Radeon RX 560 will work fine?

 

[CaseySJ]

No luck with HDMI, the same with DVI.. maybe if I buy Sapphire Pulse Radeon RX 560 will work fine?

RX 560 will work immediately with no fuss!

 

[RowenDJ]

RX 560 will work immediately with no fuss!

Thank you, so this I will do. It will be compatible with my MSI H370M BAZOOKA true? I think that all is not working by this mono.

 

[CaseySJ]

Thank you, so this I will do. It will be compatible with my MSI H370M BAZOOKA true? I think that all is not working by this mono.

Yes it will work with your motherboard. When you set it up, it will actually help to fix the on-board video ports. So if you decide to do that after RX 560 is installed, just let me know.

 

[RowenDJ]

Yes it will work with your motherboard. When you set it up, it will actually help to fix the on-board video ports. So if you decide to do that after RX 560 is installed, just let me know.

Hey again @CaseySJ. Im trying to install Mac OS Mojave with the Radeon RX 560 2GB and I have one problem, the installer stays in a loop at the second part of the install. always says: 15 min remaining, and reboot. reboot, reboot...

You know why is this happening?

 

[CaseySJ]

Hey again @CaseySJ. Im trying to install Mac OS Mojave with the Radeon RX 560 2GB and I have one problem, the installer stays in a loop at the second part of the install. always says: 15 min remaining, and reboot. reboot, reboot...

You know why is this happening?

In your config.plist, do you have the following two items turned on? You can check this with Clover Configurator:

• ACPI Section: PluginType
• Kernel and Kext Patches Section: AppleIntelCPUPM

If so, please disable both of them. You can turn them on AFTER installation is done.

I've also modified your previous config.plist, attached here. The two items above have been turned off and new framebuffer settings have been added.

If this does not help, please compress and upload your EFI folder from the EFI partition of the USB install disk!