- Joined
- Mar 20, 2018
- Messages
- 12
- Motherboard
- ASUSTEK P7P55D
- CPU
- Intel® Core™ i7 860 @ 2.80GHz × 8 (4 core)
- Graphics
- Nvidia GTX 1050
- Mac
- Mobile Phone
Note that I have "only" Asus P7P55D -motherboard
EDIT: My OS Is High Sierra 10.13.4 at the moment.
I do not see if this is answered yet, but for sound my notes say this:
AUDIO:
via KextBeast install following:
-VoodooHDA.kext (VT1828S-2.7.4 for my motherboard)
-AppleHDADisabler.kext (From same .zip-package)
Included this zip package.
There is also another VoodooHDA.kext I am using currently, I included it as well, do not remember where downloadded it, anyway, it is the version 2, edited to this motherboard. Seems to work also, and enables analog 5.1 sound, just like the 2.7.4
For login screen flickering and not enough resolution, you need to install and activate Nvidia driver.
If sound is crackling, or no audio at all (and no ethernet), try this (I have it set to 0x3, and that works):
If SIP is enabled, I could not make kexts to run.
VoodooHDA-zip contains another kext-utility, did not use that, use Kextbeast!
BUT I have a question:
Did anyone get power savings to work? I can not even put my hard drive to autosleep, since it seems to crash my system. System sleep mode does not work at all, wakes up back immediatly, and autoshutdown monitors is a gray area, testing it later. It does shut them down, but unable to say yet is it crashing the system.
EDIT: My OS Is High Sierra 10.13.4 at the moment.
I do not see if this is answered yet, but for sound my notes say this:
AUDIO:
via KextBeast install following:
-VoodooHDA.kext (VT1828S-2.7.4 for my motherboard)
-AppleHDADisabler.kext (From same .zip-package)
Included this zip package.
There is also another VoodooHDA.kext I am using currently, I included it as well, do not remember where downloadded it, anyway, it is the version 2, edited to this motherboard. Seems to work also, and enables analog 5.1 sound, just like the 2.7.4
For login screen flickering and not enough resolution, you need to install and activate Nvidia driver.
If sound is crackling, or no audio at all (and no ethernet), try this (I have it set to 0x3, and that works):
- Open /EFI/CLOVER/config.plist in Clover Configurator
- Navigate RT Variables > CsrActivateConfig
- Change CsrActiveConfig to appropriate value
- Disable SIP: 0x67
- Enable SIP: 0x00
- Enable SIP, but allow untrusted/unsigned kexts to run: 0x3
- Reboot Hackintosh to apply changes
- Install kexts via kextbeast (and maybe Realtek v2.2.1 for ethernet via Multibeast)
- Reboot
VoodooHDA-zip contains another kext-utility, did not use that, use Kextbeast!
BUT I have a question:
Did anyone get power savings to work? I can not even put my hard drive to autosleep, since it seems to crash my system. System sleep mode does not work at all, wakes up back immediatly, and autoshutdown monitors is a gray area, testing it later. It does shut them down, but unable to say yet is it crashing the system.
Attachments
Last edited: