Intel HD Graphics on El Capitan
OS X supports a range of Intel HD Graphics devices, however not all the variants present in hackintosh devices are supported out of the box.
Haswell HD4200/HD4400/HD4600: Must inject device-id=0x0412.
config.plist/Devices/FakeID/IntelGFX=0x04128086
Broadwell HD5600 (10.11.0/10.11.1 only): Must inject device-id=0x1626.
config.plist/Devices/FakeID/IntelGFX=016268086
Note: These settings are already in the plist files linked from my Clover guide...
http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html
FakePCIID Installation
In addition, the Haswell graphics accelerator kext (AppleIntelHD5000Graphics.kext) checks the PCI device-id against a set of known values. Because the HD4200/HD4400/HD4600(mobile) values are not accommodated by this check, you must install FakePCIID kexts for PCI device-id spoofing.
The latest release of FakePCIID can be found here:
https://bitbucket.org/RehabMan/os-x-fake-pci-id/downloads
The source code is located at:
https://github.com/RehabMan/OS-X-Fake-PCI-ID
Install both FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext (originally FakePCIID_HD4600_HD4400.kext) in /System/Library/Extensions, EFI/Clover/kexts (typically in EFI/Clover/kexts/Other), or /Library/Extensions (10.11+).
--
Note: This post, simplified for Clover only 10.11, based on original by the-darkvoid for Yosemite:
http://www.tonymacx86.com/yosemite-...tel-hd4200-hd4400-hd4600-mobile-yosemite.html.
Problem Reporting
Post ioreg
as ZIP:
http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.
Also, post EFI/Clover folder
as ZIP (press F4 at main Clover screen before collecting). Please
eliminate 'themes' directory, especially if you have an overabundance of themes installed. Provide only EFI/Clover, not the entire EFI folder.
Also post output of:
Code:
sudo touch /System/Library/Extensions && sudo kextcache -u /