Contribute
Register

[FIX] HD4200/HD4400/HD4600/HD5600 on 10.11+

i use invalid ig platform id because i can t boot whith the valid ig plateform id,now i use the fakepciid from you ,RehabMan-FakePCIID-2017-1215 ,i try the ACPIbaklightcontrol because i m in 10,11,2 and i v no brigntness control (i hidde it now),i can t boot the os with this two fakepciid (fakepciid and fakepciidintelgraphics) i try with the debug and realase version with no result.what can i do?
i joint my new gendebug-sh

No expectation of working graphics with an invalid FakeID.

From where did you download OS X?
On what hardware did you create your USB installer?

Note: For 10.11.x brightness control, use IntelBacklight.kext + "Brightness Fix" ACPI patch (or config.plist/ACPI/DSDT/Fixes/AddPNLF=true).
 
a friend give me the osx install;he s got a computer shop ,i use this instal osx on other computer with hd4600 without problems,i make the install usb myself using restor image in diskutility for the osx base systhem and i install clover on the 2g msdos partition of my usb key,i try with other osx install like yosemite and i have the same problem exactly,excuse my poor english.
 
i use a hackintoch to create my usb key instal,first copy the instal in application then mount instashield dmg,and restor image on the usb key and copy pakages,and basedmg and chunk..to the roots off the key
 
a friend give me the osx install;he s got a computer shop ,i use this instal osx on other computer with hd4600 without problems,i make the install usb myself using restor image in diskutility for the osx base systhem and i install clover on the 2g msdos partition of my usb key,i try with other osx install like yosemite and i have the same problem exactly,excuse my poor english.
i use a hackintoch to create my usb key instal,first copy the instal in application then mount instashield dmg,and restor image on the usb key and copy pakages,and basedmg and chunk..to the roots off the key

Start over.
Follow the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
 
i follow this guid and i can t boot with the good igplatform id thats why i use 0x1234578,with the 4200/440/4600 ig plateform id i boot on osx but do not finish the loading process,the screen flash one time and go black


In case you cannot boot with a valid ig-platform-id (may need to inject EDID, or patch IOKit/CoreDisplay when you have a 4k display, or other problems), use an invalid ig-platform-id (0x12345678) and deal with the graphics issue at post-install.

i use this instal of 10,11 on hpprobook6460b no problems,on hp envy 15 with no problems,i mean there is on this spectre x2 pro something special in display or something else.

whats does meen :
In case you cannot boot with a valid ig-platform-id (may need to inject EDID, or patch IOKit/CoreDisplay when you have a 4k display, or other problems) ????
 
Last edited:
i follow this guid

You clearly did not.
The guide I linked requires you download from the Mac App Store and create your USB installer on the same computer used to access the Mac App Store using 'createinstallmedia'.
 
i can t dawnload el capitain ,my computer already have el capitain 10,11,6,only sierra available so i dawnload it and i l try to install with creatinstal media tomorow
olease i d like to insert edid ,because i m shure i ll have the same probleme with sierra , i have a edid report of my display ,could you tell me what do i have to writ in my config plis witjh clover editor for the vendor id and product id and evrything i v to writ.


and tell me if with sierra needs more work for hd4200 working?
 

Attachments

  • edid display hp spectre.rtf.zip
    6.6 KB · Views: 73
i can t dawnload el capitain ,my computer already have el capitain 10,11,6,only sierra available so i dawnload it and i l try to install with creatinstal media tomorow
olease i d like to insert edid ,because i m shure i ll have the same probleme with sierra , i have a edid report of my display ,could you tell me what do i have to writ in my config plis witjh clover editor for the vendor id and product id and evrything i v to writ.


and tell me if with sierra needs more work for hd4200 working?

Clover will inject EDID if you specify it in config.plist/Graphics/EDID/Custom and set config.plist/Graphics/EDID/Inject=true.
You should read the Clover documentation.
 
I have graphics acceleration with what appears to be QI/CI with 24-Bit Colour using Desktop ig-platform-id 0x0d220003. The problem is backgrounds have a slight watery wave effect using 0x0d220003, so it is not perfect. I read that I should be using a mobile ig-platform-id.

But I am stuck using desktop ig-platform-id 0x0d220003 on Thinkpad laptop as most of the other ig-platform-id's
including recommended mobile ig-platform-id 0x0a260006 results with my Thinkpad booting to a black screen.

The only mobile ig-platform-id that work on my thinkpad are 04160002 and 0a260008 but with no graphics acceleration.


Have had a read through the following links and tried hours of troubleshooting including EDID injection and custom EDID.

[Fix] Intel HD4200/HD4400/HD4600 Mobile

Including the README note for Rehabman FakePCIID and Rehabman Clover laptop config.plist.

Would appreciate some help.

Have read through the Problem reporting, and include:

Code:
KernelCache ID: E033C16697CAA5322A81B8B82A43831F

Code:
kextstat|grep -y acpiplat
    15    2 0xffffff7f826df000 0x9c000    0x9c000    com.apple.driver.AppleACPIPlatform (6.1) 1804645B-B360-305E-B1BE-916F5E3E1CC4 <14 13 12 11 7 6 5 4 3 1>
   
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc

120    0 0xffffff7f827a0000 0x3000     0x3000     com.apple.driver.AppleLPC (3.1) 7C24E741-BD4A-3917-83AC-E956A03ADC20 <111 12 5 4 3>

and attached files:

MacBook Pro.ioreg

CLOVER
 

Attachments

  • John’s MacBook Pro.ioreg
    4.8 MB · Views: 166
  • CLOVER.zip
    1.8 MB · Views: 145
I have graphics acceleration with what appears to be QI/CI with 24-Bit Colour using Desktop ig-platform-id 0x0d220003. The problem is backgrounds have a slight watery wave effect using 0x0d220003, so it is not perfect. I read that I should be using a mobile ig-platform-id.

But I am stuck using desktop ig-platform-id 0x0d220003 on Thinkpad laptop as most of the other ig-platform-id's
including recommended mobile ig-platform-id 0x0a260006 results with my Thinkpad booting to a black screen.

The only mobile ig-platform-id that work on my thinkpad are 04160002 and 0a260008 but with no graphics acceleration.


Have had a read through the following links and tried hours of troubleshooting including EDID injection and custom EDID.

[Fix] Intel HD4200/HD4400/HD4600 Mobile

Including the README note for Rehabman FakePCIID and Rehabman Clover laptop config.plist.

Would appreciate some help.

Have read through the Problem reporting, and include:

Code:
KernelCache ID: E033C16697CAA5322A81B8B82A43831F

Code:
kextstat|grep -y acpiplat
    15    2 0xffffff7f826df000 0x9c000    0x9c000    com.apple.driver.AppleACPIPlatform (6.1) 1804645B-B360-305E-B1BE-916F5E3E1CC4 <14 13 12 11 7 6 5 4 3 1>
  
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc

120    0 0xffffff7f827a0000 0x3000     0x3000     com.apple.driver.AppleLPC (3.1) 7C24E741-BD4A-3917-83AC-E956A03ADC20 <111 12 5 4 3>

and attached files:

MacBook Pro.ioreg

CLOVER

Check in Windows to see if your display is connected via eDP.
eDP is not supported very well..
 
Back
Top