[Guide] Xiaomi Mi Notebook Pro High Sierra 10.13.6

[Macguru341]

"Problem Reporting" files are incomplete (ioreg is missing).
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

Your kextcache output proves kexts are not installed correctly.
All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

here is the missing file

another issue I have - when I update the system in App Store and the pc reboot it just get back into the desktop after clover again and don't update the system
Also about the kext - I did everything as it says in the manual - can you tell me which kext I need to reinstall?

As I understand by the the link you shared there’s Kexts that need to be install to clover in the EFI that the machine will boot properly and there’s a Kexts that need to be installed to the system after the installation, but in this manual there’s nothing about that , it just says to replace the clover folder with the one in the attachment, so I don’t now which Kexts I need to install to the system with the Kexts installer.

thanks

 

[owenlars]

Great work Owens just a few questions.

Can you link to all the parts you used?

Can you explain how you cut part of the m2 adaptor to fit the laptop?

Hi, I will compile a parts list and some basic instructions when I get a chance. Been quite busy today. Will post some more detail as soon as I have a chance.

 

[Undertakerg]

View attachment 322704 here is a new update: I did a bit of testing, if I connect a type-c adapter with hdmi, the external monitor works regularly. If I connect hdmi to the PC port, the notebook screen goes black. Help me.

There is a solution for this, when you boot into the system with the hdmi connected your laptop screen will go black. Close the lid, wait for 5 seconds and then open it again, both screens will probably working now( thats what i do each time i boot up). Hope that works!!

 

[OptionalPoem01]

Hi, I will compile a parts list and some basic instructions when I get a chance. Been quite busy today. Will post some more detail as soon as I have a chance.

You sir are a god send. Thank you for this and pioneering it for the rest of us.

 

[RehabMan]

Hello.
Thank you all for the excellent work.
I installed the hackintosh without any problems.

However, I have a few questions.
1. The percentage of the battery does not change in the menu bar (charging or discharging the battery). Is it just me? Tell me, if anyone knows how to fix it.
2. The trackpad works mostly works fine, but when imitating the right key it works extremely badly. Rather does not even work, what works badly
And a periodic bug. The trackpad starts counting one extra touch.

sorry for my english. I'm using a translator

p.s. if someone wants to buy the second slot ADATA SSD XPG XS6000/7000/8000, I do not advise. Strongly heated. At me works on 58-60 degrees, thus that the maximum admissible temperature of 70 degrees.
TP-Link TL-WN823N work fine with drivers on tp-link site.
//High Sierra 10.13.4

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[RehabMan]

here is the missing file

another issue I have - when I update the system in App Store and the pc reboot it just get back into the desktop after clover again and don't update the system
Also about the kext - I did everything as it says in the manual - can you tell me which kext I need to reinstall?

As I understand by the the link you shared there’s Kexts that need to be install to clover in the EFI that the machine will boot properly and there’s a Kexts that need to be installed to the system after the installation, but in this manual there’s nothing about that , it just says to replace the clover folder with the one in the attachment, so I don’t now which Kexts I need to install to the system with the Kexts installer.

thanks

You can read the FAQ and main laptop Clover guide to learn about correct kext install procedures.
And there is a few other things you should read in the FAQ as well (USB WiFi not recommended is one example).

 

[Cabriolet]

the WiFi Card:soldered Intel chip, will never work

 

[Macguru341]

You can read the FAQ and main laptop Clover guide to learn about correct kext install procedures.

And there is a few other things you should read in the FAQ as well (USB WiFi not recommended is one example).

thanks for all the support RehabMan , I've looked and read all the posts in this thread and also read the FAQ for 2 times, went all night searching and learning about the hackintosh , notebooks hackintosh , kexts and everything I need to learn to get to know my hardware and to be able to make my Xioami Notebook Pro work perfectly but I'm still standing across a big river and can't seems to get pass it without your help and the forum help . So my deep request is the help me pass this issues and finally stop siting on the computer desk all the time and find reasons for my wife what am I doing here all the time

1. Bluetooth - I see the Bluetooth icon in the top and I see it’s on but I can’t connect to a Bluetooth headphones ( I even see my AirPods in the list and when I press connect there’s a freeze for a 5 sec and it still says connect)
2. Ethernet - I use Anker Ethernet usb-C adapter and it seems after sleep is not working , I need to unplug it and than plug it back to get back my internet and after I’m doing it the notebook won’t go to sleep anymore just the screen is turning off. I see that in Anker website there was a patch release that fix this issue with all MacBook but after installing it nothing changes , here is a screen shot of the package , maybe there’s another way to implement it in this notebook? I've also had the file itself to this post

3. Trackpad : look up& data detectors - tap with three fingers is not working, secondary click - click is working Tap isn’t, scroll direction: natural is working most of the times, zoom in or out isn’t working , smart zoom double tap with two fingers isn’t working, rotate isn’t working, swipe between pages isn’t working , swipe between full screen app isn’t working , Notification Center isn’t working , mission control is working but the mouse get stuck , launchpad isn’t working , show desktop isn’t working.

4.Sleep / a wake - it seems the notebook is going to sleep well (I see the power led blinking) but to wake it up I need to press the power button and I can’t wake it with the keyboard/mouse/trackpad.

5. Handoff - I don’t even have the option in General preference.

6. OS update 10.13.4- after applying the update in the AppStore there’s need to do a restart and the notebook come to the clover menu and I choose the MacOS and the update is not running , I just comeback to the desktop without applying the update




as I understand there’s some issues with the kexts I have and there’s some I need to install to the system folder but I don’t know which one.

 

[RehabMan]

thanks for all the support RehabMan , I've looked and read all the posts in this thread and also read the FAQ for 2 times, went all night searching and learning about the hackintosh , notebooks hackintosh , kexts and everything I need to learn to get to know my hardware and to be able to make my Xioami Notebook Pro work perfectly but I'm still standing across a big river and can't seems to get pass it without your help and the forum help . So my deep request is the help me pass this issues and finally stop siting on the computer desk all the time and find reasons for my wife what am I doing here all the time

1. Bluetooth - I see the Bluetooth icon in the top and I see it’s on but I can’t connect to a Bluetooth headphones ( I even see my AirPods in the list and when I press connect there’s a freeze for a 5 sec and it still says connect)
2. Ethernet - I use Anker Ethernet usb-C adapter and it seems after sleep is not working , I need to unplug it and than plug it back to get back my internet and after I’m doing it the notebook won’t go to sleep anymore just the screen is turning off. I see that in Anker website there was a patch release that fix this issue with all MacBook but after installing it nothing changes , here is a screen shot of the package , maybe there’s another way to implement it in this notebook? I've also had the file itself to this post

3. Trackpad : look up& data detectors - tap with three fingers is not working, secondary click - click is working Tap isn’t, scroll direction: natural is working most of the times, zoom in or out isn’t working , smart zoom double tap with two fingers isn’t working, rotate isn’t working, swipe between pages isn’t working , swipe between full screen app isn’t working , Notification Center isn’t working , mission control is working but the mouse get stuck , launchpad isn’t working , show desktop isn’t working.

4.Sleep / a wake - it seems the notebook is going to sleep well (I see the power led blinking) but to wake it up I need to press the power button and I can’t wake it with the keyboard/mouse/trackpad.

5. Handoff - I don’t even have the option in General preference.

6. OS update 10.13.4- after applying the update in the AppStore there’s need to do a restart and the notebook come to the clover menu and I choose the MacOS and the update is not running , I just comeback to the desktop without applying the update




as I understand there’s some issues with the kexts I have and there’s some I need to install to the system folder but I don’t know which one.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[Macguru341]

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

here is the file . thanks