Is it possible to get the unbundled SSDT patches? I like to know what's going on.
It's less something specific and more a better understanding. I like my system to be clearer rather than cleaner. I'll open it though, thanks
Thanks. I had to update my Mac 10.13 to 10.13.1 and now I still get the brightness slider in Display with the kext applied but the level I set is still not saving on reboot. I looked over the guide and tried to remove the PNLF from the .aml file that was posted in this guide and use your PNLF with the AppleBacklightInjector and same thing. Once I get my Dell DW1560 for Wireless, I can provide my problem reporting files. It's weird as I selected the proper Drivers64UEFI and the RC scripts option in the Clover setup so NVRAM should be working unless Dell changed something in the latest BIOS update for this laptop?
No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Here is my problem reporting files. Per your guide, I put the AppleBacklightInjector.kext in L/E so that's why it's not in my Clover/kexts/Other. When I saw that brightness wasn't sticking after reboot on your guide as well, I put the original PNLF section back in the .aml file as you will see. Let me know if there is anything else you will need.
Your kexts are not installed correctly.
Read post #2 of the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
OK all kexts are now in S/L/E
NVRAM is still not remembering my brightness setting.
Also on a side note, the Dell brightness keys are mapped to F11 and F12. Per my problem reporting files, I am using your VoodooPS2Controller with the Dell aml file for the profile but was wondering what code can I use to map the brightness keys?
Lastly one bug I noticed with your VoodooPS2Controller is some keys such as the "`~" key is currently mapped to where the pipe key should be. Right now if I physical press the "`~", "§±" will appear so how can I change that so it is mapped correctly? I did make sure that the language in keyboard was set up correctly and ran through the change keyboard type to make sure.