- Joined
- Jun 6, 2017
- Messages
- 1
- Motherboard
- GIGABYTE G1 Gaming GA-Z170N-Gaming 5 (rev. 1.0)
- CPU
- Intel Core i7-6700K 8M Skylake Quad-Core 4.0 GHz
- Graphics
- EVGA GeForce GTX 1070 08G-P4-6170-RX Founders Edition
Kernel Panic caused by GPUSensors.kextHey everyone. I've gone through these steps a couple of times with each resulting in panic upon restart.
The Rules said:Profiles need to contain at least your primary system to assist others with helping you.
Fixing USB Ports
- Install USBInjectAll into /EFI/CLOVER/kexts/10.11
- Install the following SSDT-1.aml file into your patched SSDT folder at /EFI/CLOVER/ACPI/patched. The previous processor SSDT should be named SSDT.aml and in the folder, as per the instructions above.
- USB3 and USB2 ports should work (did not test type C port)
- USB3.1 port (red) works, but only tested in macOS Sierra
Use Windows to find where those front USB 3.0 ports are in the device tree. Are they controlled by the XHC or by a hub connected to the XHC, or by a different controller altogether?I followed part of this guide as per recommendation of this guide:
https://www.tonymacx86.com/threads/...z170mx-gaming-5-i7-6700k-gtx-1080-960.214769/
So I'm sure its something simple I'm missing but I followed this and I still have some USB ports that are not working. Specifically, my two front USB 3.0 ports aren't working. I have the LIAN LI Ebonsteel K6 case which has 1 x 2.0 USB port and 2 x 3.0 USB ports on the front panel.
I currently have my dongle for my Logitech M510 wireless mouse in the 2.0 port and when I went to plug in my external Seagate hard drive it would not work. It was only until I plugged into the motherboard back panel that I was able to access the hard drive.
ANY IDEAS?
The GA-Z170MX-Gaming 5 is a different motherboard. It has 2 USB 3.0 headers (4 ports). Your case only has 2 USB 3.0 ports though. You should try connecting the USB 3.0 ports to each of the headers to map their location.