- Joined
- Apr 20, 2016
- Messages
- 17
- Mac
- Classic Mac
- Mobile Phone
Not exactly sure on what your asking?
delete
Last edited:
Not exactly sure on what your asking?
English is not good
Complete Ozmosis boot
I made the BIOS boot
Your SSDT modification content
Sound card ID 5
lpc 8cc4
Brush directly into the BIOS, you can boot the system
My computer configuration
i5 4590
z97n wifi
bcm94360cs2
I'm sorryOzmosis is off-topic. This guide uses Clover not Ozmosis. Patches will probably be the same not sure as i don't flash my BIOS with junk.
Hello all, so I tried to follow the guide from VioletDragon as good as I could (first time trying a hackintosh). So far to me it all seems to work except USB 3.0. With SSDT-USB usb 3.0 works except the fact that I lose the front panel USB 3.0 ports as well as 2 USB 3.0 ports on the motherboard. Without the SSDT-USB I got all ports working but only at usb 2.0 speeds. Is there a way to get those ports to work and with usb 3.0 as well or not? Thanks in advance, IOReg uploaded.
Upon further inspection of the IOReg in #124, is it correct that I'm missing ports 5,6 and 9,10?
I followed your guide exactly so I got no idea why you got your H97N working correctly and I don't with my Z97N.
When I remove your ssdt-usb I get all ports working, but my external hdd won't connect since it's usb 3.0 (see IOReg attached).
Any idea or point me in the right direction to fix this? Maybe helpful I haven't touched usbinjectall I just placed it in the extensions folder is that where the problem comes from?
Anyway thanks in advance.
XHCI set to enabled gave some trouble on my machine, also when I restart, the bios restarting two time in a rowUSB Configuration isn't correct. Set XHCI to enabled not Auto or Smart Auto. USB is messy need to remove Ports thats not used.
XHCI set to enabled gave some trouble on my machine, also when I restart, the bios restarting two time in a row