Contribute
Register

[Guide] Z/H97N-WIFI with Nvidia Graphics using Clover UEFI Hotpatch

Status
Not open for further replies.
lff520520 said:
English is not good

Complete Ozmosis boot

I made the BIOS boot

Your SSDT modification content

Sound card ID 5
lpc 8cc4

Brush directly into the BIOS, you can boot the system

My computer configuration
i5 4590
z97n wifi
bcm94360cs2
Click to expand...

Ozmosis is off-topic. This guide uses Clover not Ozmosis. Patches will probably be the same not sure as i don't flash my BIOS with junk.
 
Hello all, so I tried to follow the guide from VioletDragon as good as I could (first time trying a hackintosh). So far to me it all seems to work except USB 3.0. With SSDT-USB usb 3.0 works except the fact that I lose the front panel USB 3.0 ports as well as 2 USB 3.0 ports on the motherboard. Without the SSDT-USB I got all ports working but only at usb 2.0 speeds. Is there a way to get those ports to work and with usb 3.0 as well or not? Thanks in advance, IOReg uploaded.
 

Attachments

  • i5 4690K 10.12.6.ioreg
    6.2 MB · Views: 84
BlackSapphire said:
Hello all, so I tried to follow the guide from VioletDragon as good as I could (first time trying a hackintosh). So far to me it all seems to work except USB 3.0. With SSDT-USB usb 3.0 works except the fact that I lose the front panel USB 3.0 ports as well as 2 USB 3.0 ports on the motherboard. Without the SSDT-USB I got all ports working but only at usb 2.0 speeds. Is there a way to get those ports to work and with usb 3.0 as well or not? Thanks in advance, IOReg uploaded.
Click to expand...

USB Configuration isn't correct. Set XHCI to enabled not Auto or Smart Auto. USB is messy need to remove Ports thats not used.
 
Upon further inspection of the IOReg in #124, is it correct that I'm missing ports 5,6 and 9,10?
I followed your guide exactly so I got no idea why you got your H97N working correctly and I don't with my Z97N.

When I remove your ssdt-usb I get all ports working, but my external hdd won't connect since it's usb 3.0 (see IOReg attached).

Any idea or point me in the right direction to fix this? Maybe helpful I haven't touched usbinjectall I just placed it in the extensions folder is that where the problem comes from?

Anyway thanks in advance.
 

Attachments

  • i5 4690k v2.ioreg
    6 MB · Views: 130
BlackSapphire said:
Upon further inspection of the IOReg in #124, is it correct that I'm missing ports 5,6 and 9,10?
I followed your guide exactly so I got no idea why you got your H97N working correctly and I don't with my Z97N.

When I remove your ssdt-usb I get all ports working, but my external hdd won't connect since it's usb 3.0 (see IOReg attached).

Any idea or point me in the right direction to fix this? Maybe helpful I haven't touched usbinjectall I just placed it in the extensions folder is that where the problem comes from?

Anyway thanks in advance.
Click to expand...

You need to remove ports that are not being used anyway.
 
Well okay fixing this seems a bit out of my knowledge by now. I tried researching it for a couple of months but I can't seem to get my usb to fully work. Thanks anyway.
 
VioletDragon said:
USB Configuration isn't correct. Set XHCI to enabled not Auto or Smart Auto. USB is messy need to remove Ports thats not used.
Click to expand...
XHCI set to enabled gave some trouble on my machine, also when I restart, the bios restarting two time in a row
 
controlbase said:
XHCI set to enabled gave some trouble on my machine, also when I restart, the bios restarting two time in a row
Click to expand...

The restart is a common issue happens with Windows also. No Problem Reporting Files attached.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top