10.12.5 and forgot Lilu.kext + IntelGraphicsFixup.kext?
I had read the tonymacx86 post and also had put these kexts on /Library/Extensions using KextBeast.
Anyway, I check it again and install these kexts again. Now it boot and I get full acceleration.
After getting full acceleration I get two new issues:
- I lost my ultrawide resolution (2560x1080) from LG 25UM58-P and need to solve it with mac-pixel-clock-patch-V2.
- In "About this Mac" window my graphics card is now listed as "Intel Unknown 1536 MB" while before was "Intel HD 630 GT2 4MB", do you know why and how to solve this one?
---
Another problem that I'm experiencing is that audio is not recognized. I have no input/output device listed. My motherboard has Realtek ALC892 and I used MultiBeast to install the support for it but it do not work. The realtekALC.kext was installed to /Library/Extensions/, the patches for AppleHDA.kext are on Clover, I only do not know if specific zlib files was added into AppleHDA.kext/Contents/Resources because I can not notice a recent modified file.
So anyone can help with the audio problem?
---
Another thing that I consider more an issue over a problem is that when I check on "About this Mac" window it recognizes my processor as a 3,5 GHz Quad-Core Intel Xeon. A few times it takes correctly as 3,5 Intel Core i5.
Anyone knows why this occurs? Can we fix this?
---
Finally I just want to share here that while I was waiting for this answer I also try to use my GTX 1070 and I was able to use it with full acceleration after installing the last nVIDIA Web Drivers from tonymacx86 downloads section and also after adding EmuVariableUefi-64.efi driver to Clover on my SSD EFI partition, because my motherboard does not support NVRAM. Finally I also checked the NvidiaWeb option under System Parameters on Clover. These settings worked like a charm and even detects the ultrawide resolution (2560x1080) without any patch or configuration.
Another thing about my configuration is that I use 2400MHz memory. To make it work I had to flash/update my motherboard BIOS to the last one from MSI to properly activate the XMP on my motherboard (before flashing/updating the BIOS I was able to activate the XMP but the BIOS was not recognizing the OC frequency). Finally I also checked the XMPDetection=Yes under Boot on Clover.