[Guide] Dell Inspiron 15 7559 El Capitan Hackintosh (Dual Boot With Windows)

[nirj11]

For some that is the case... but may report better results with MacBookPro11,1. It will probably vary depending on hardware.

I recommend MacBookPro11,1 when people report weird things and are using MacBookPro11,2. MacBookPro11,2 appears to carry unnecessary risk.

I switch to 11,1 and now the OS wont load I stuck on apple logo

 

[Johnnnnnnnnnny]

I switch to 11,1 and now the OS wont load I stuck on apple logo

I´d recommend start over from beginning. You probably did a mistake following the guide.
Also try connect or disconnect the adapter and verbose mode

 

[nirj11]

I´d recommend start over from beginning. You probably did a mistake following the guide.
Also try connect or disconnect the adapter and verbose mode

Noooo!!! I have a lot of data on this laptop!! I can't enter the OS in safe mode or without injected next?

 

[Johnnnnnnnnnny]

Noooo!!! I have a lot of data on this laptop!! I can't enter the OS in safe mode or without injected next?

You can try.
Or you can always boot with the installer USB to backup the data

 

[nirj11]

You can try.
Or you can always boot with the installer USB to backup the data

i can't boot from the USB it stuck on the two lines and one line of '+'
i used nv_disable=1 and -v and i put 0x19160000 in the fakeID

 

[Johnnnnnnnnnny]

i can't boot from the USB it stuck on the two lines and one line of '+'
i used nv_disable=1 and -v and i put 0x19160000 in the fakeID

- Replace the EFI folder of your installer with the one from the Dell files called “EFI (Boot after installed2)”
- Rename the folder to EFI again

This way it won´t boot?
You should be able to boot from the USB installer you used to install OsX
Note: Leave only USB and adapter connected

 

[nirj11]

- Replace the EFI folder of your installer with the one from the Dell files called “EFI (Boot after installed2)”
- Rename the folder to EFI again

This way it won´t boot?
You should be able to boot from the USB installer you used to install OsX
Note: Leave only USB and adapter connected

still not boot

 

[Johnnnnnnnnnny]

still not boot

So chceck troubleshooting in Section 5 of this guide.

 

[RehabMan]

I switch to 11,1 and now the OS wont load I stuck on apple logo

Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).

 

[nirj11]

Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).

this started when i changed my SMBIOS to 11,1 maybe if i change it back to 11,2 it will load again but it seems that all the config.plist values have been deleted
you can pleas upload photo with the values and the SMBIOS details

thanks!