- Joined
- Jan 20, 2015
- Messages
- 7
- Motherboard
- Gigabyte Z97X-UD5H
- CPU
- i7-4790K
- Graphics
- EVGA GT 740 FTW
- Mac
- Mobile Phone
I've been happily running a custom box with a GA-797X-UD5H motherboard and an Nvidia GT 740 graphics card (EVGA GeForce GT 740 2GB FTW). After installing the 10.10.3 upgrade, my setup was working but I was seeing a lot of instability with the onboard NIC. So, I re-ran MultiBeast (settings listed below) and on my next boot I didn't have any video. Everything seems to work right up to the point where it should display the login screen; at that point, the screens go blank (and quickly go into power-saver mode).
Following some advice on the forums surrounding the 10.10.1 compatible Nvidia drivers, I booted the system with -x and nv_disable=1. That worked, albeit in a super low-res mode. I then installed the latest Nvidia drivers based on this post. Then I rebooted, but I'm still having the same problem.
Any suggestions on what else I should check?
Thanks!
-Sean
MultiBeast Settings
-=-=-=-=-=-=-=-
DSDT Free
3rd Party SATA
10.10.3 TRIM Patch
FakeSMC v6.14.1364
AppleIntelE1000e v3.1.0a
Chimera v4.1.0
Basic Boot Options
Hibernate Mode - Desktop
Kext Dev Mode
Use KernelCache
Mac Pro 6,1
tonymacx86 Black
Following some advice on the forums surrounding the 10.10.1 compatible Nvidia drivers, I booted the system with -x and nv_disable=1. That worked, albeit in a super low-res mode. I then installed the latest Nvidia drivers based on this post. Then I rebooted, but I'm still having the same problem.
Any suggestions on what else I should check?
Thanks!
-Sean
MultiBeast Settings
-=-=-=-=-=-=-=-
DSDT Free
3rd Party SATA
10.10.3 TRIM Patch
FakeSMC v6.14.1364
AppleIntelE1000e v3.1.0a
Chimera v4.1.0
Basic Boot Options
Hibernate Mode - Desktop
Kext Dev Mode
Use KernelCache
Mac Pro 6,1
tonymacx86 Black