Z77X-UD5H Sierra Clover ssdt Hotpatch Problem reporting files.

[zedoc]

Hi,
Trying to move from DSDT to Clover Hotpatch for my Z77X-UD5H, i've used SSDT Hotpatch set made by "VioletDragon" here:
https://github.com/VoiletDragon/Z77X-UD5H-Clover-Hotpatch-Patches
thanks for this!

Now i still have a few problems with USB i already had with my previous patched DSDT:

1 - computer wake from sleep when a BCM943602CS wifi BT Card usb is plugged on the internal hub of motherboard,
tried to plug other things to this internal HUB like "Corsair link USB" from PSU and computer wake from sleep too.

2- when i plug a USB3 Key on Front USB3 of my case, it's most of the time recognised as USB2 speed or sometimes not mounting and USB3 working when plugged before starting computer.

Here's my config files and ioreg if you can point me to the right direction.

Cheers

PS: i'm also using an old USB2 external hub.

 

[VioletDragon]

Hi,
Trying to move from DSDT to Clover Hotpatch for my Z77X-UD5H, i've used SSDT Hotpatch set made by "VioletDragon" here:
https://github.com/VoiletDragon/Z77X-UD5H-Clover-Hotpatch-Patches
thanks for this!

Now i still have a few problems with USB i already had with my previous patched DSDT:

1 - computer wake from sleep when a BCM943602CS wifi BT Card usb is plugged on the internal hub of motherboard,
tried to plug other things to this internal HUB like "Corsair link USB" from PSU and computer wake from sleep too.

2- when i plug a USB3 Key on Front USB3 of my case, it's most of the time recognised as USB2 speed or sometimes not mounting and USB3 working when plugged before starting computer.

Here's my config files and ioreg if you can point me to the right direction.

Cheers

PS: i'm also using an old USB2 external hub.

View attachment 260952View attachment 260953 View attachment 260954View attachment 260956

Config appears to be one thats not from my Fork. Change IGPU to GFX0 is not needed. Use the config from the Z77X-UD5H fork rename to config.plist and copy your values over. Ioreg is corrupt possibly using wrong version or didn't (Save Copy As). [Guide] How to Make a Copy of IOReg | tonymacx86.com

 

[zedoc]

Regarding config.plist:
i've kept XCPM patches from "theracemaster" and "Piker alpha"
https://github.com/theracermaster/Gigabyte-GA-Z77X-macOS-Install
and his USB disable port injector patches (don't know if it's really usefull...)
i'm also overclocking to 4.6gz.
otherwise SSDT's are from your fork.

here's a new ioreg from the Toleda's post IORregistryexplorer version 2.1, i was using version 3.2
and added Clover patches screenshots

PS: i've disabled atheros LAN so didn't used your SSDT-LAN.aml

 

[VioletDragon]

Regarding config.plist:
i've kept XCPM patches from "theracemaster" and "Piker alpha"
https://github.com/theracermaster/Gigabyte-GA-Z77X-macOS-Install
and his USB disable port injector patches (don't know if it's really usefull...)
i'm also overclocking to 4.6gz.
otherwise SSDT's are from your fork.

here's a new ioreg from the Toleda's post IORregistryexplorer version 2.1, i was using version 3.2
and added Clover patches screenshots

PS: i've disabled atheros LAN so didn't used your SSDT-LAN.aml

Ioreg looks fine but bare in mind that your board has Renases USB 3.0 and won't work. But Series 7 USB 3 will work fine. USB configuration is messy.